ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic Photon S Photon Mono LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Box

I have had both a printer as well as this curing station from Anycubic and regretted purchasing them both. The printer caused me headaches over the course of a year what with needing replacement parts and having to go through Anycubic’s laughable after sales department. There is no support based in the US so all communication is through email to people in China resulting in a massive delay in response. The wash and cure plus has had the UV lights stop working after using it less than a handful of times and frankly I dont see myself trusting this brands products ever again

This a pretty good wash and cure station streamlines the process very well. However idk if it’s me or the station but it cures very inconsistently. Some prints will turn brittle in 6 min others the same size won’t cure after doing 6 min option 5 times!! This needed a fix so I tried covering the lid and bottom on the inside with foil. Still doesn’t work the best.

Great! Would have loved recommended times for washing/curing.

Very good machine for the cost, was pleasently surprised. It is not too difficult to set up and doesnt take up too much space, perfect for beginners!

The device is pretty much a read the manual and use kind of thing. Setting up was very easy and the results are great to clean and cure the resin. My only gripe with this is that the metal basket already rusted! Also I noticed that three of the welds are off for the grid on the basket. I thought it would be safe to have it be in and out of the ipa bath when cleaning, but apparently not. So if you buy this please do keep in mind your basket may rust. 2 stars off just because of the QA mishap here. Overall I do recommend this to cure your resins.

This was way better than the cardboard box I setup for curing parts. Also the wash part made resin printer process super simple! Highly recommend for anyone doing resin printing, as its worth the expense.

After opening the outside packaging, it became apparent that something was wrong. The foam/plastic packaging looked torn and ripped into. The yellow UV cover has a crack in it. And the metal/paint has scratches on it. The lights work, and the table turns, but very upset about the damage, especially considering the price.

Fresh into the resin print business, by 2 days. I purchased this to handle large print post processing. The set up took me 15 minutes at most to uncrate, set up and power it up. It is very user friendly and intuitive too use. Simple select either wash or cure, then duration and lastly push in the knob to start the process. The large capacity allows for either several small to medium sized prints to be cleaned at once. The only issue I’ve had is with very small pieces , like table top miniature figure hands, they can fall through but this is easily remedied. One the lid is secured on you can’t smell the wash media, I use 91% IPA. You can also wash your build plate with this. I haven’t tried this yet but my Sbox resin printer fit in the required spot nicely.

This wash and cure station is a time and space saver. I was hesitant about getting into resin printing but the wash and cure station convinced me. I don’t have anything bad to say about it. It does exactly what I expected and at a great price. The build quality is worth every penny as Anycubic doesn’t cut any corners with materials. I would highly recommend this to anyone in resin printing.

So this wash and cure station is replacing a multi piece cleaning station I built. I have tried this out already and Had to use simple green since currenly with covid there is no IPA. the part came out beautiful. I tried it by securing the photon platform to the wash station to wash the parts. the fan on the bottom creates the perfect flow to clean every inch of the parts. also since it washes directly on the build plate it makes clean upa snap. then when it came to the curing aspect again wonderful job and the timer is such a great feature to have. This wash and cure station has now cleaned up my work bench from having 4 cleaning containers and then a UV box to this one compact unit. I woukd highly recommend this to anyone that is wanting to clean oarts effortlessly!