ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
N. P.
> 3 dayWhen building a top gaming rig, you need to ensure you are using top quality thermal compound paste to protect your most critical parts from heat damage. Thermal compound paste ensures heat created is transferred to the heat sink so it can be safely evacuated out of the system via air or liquid cooling.
-
J
> 3 dayWorks great and easy to apply, had to redo my processor and graphics card since its been a good while.
-
Ahmad
> 3 dayGreat thermal paste with lots of paste for multiple thermal pasting. Cpu runs great and the scooper it came with was amazing!
-
Daniel L.
Greater than one weekGood thermal testing results for me.
-
4you
10-06-2025Easy to use when replacing the CPU and putting the heat sink onto the CPU.
-
Nancy D. Baddick
> 3 dayWorked well and quite easy
-
William D.
> 3 daysaw a 20C improvement over cheap old thermal paste.
-
Daniel
> 3 dayReplaced old thermal paste for this fresh paste. Used to be at 65-70°c before and after replace paste, it went down to 35-45°c! Sick paste...
-
Rajeev
> 3 dayworks great, just as expected.
-
Mahdi Farhat
> 3 daybad bad bad dry up so fast.. my macbook start to get hot again after a week of use
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
