













Comgrow 3D Printer Enclosure, Fireproof and Dustproof Tent for Ender 3 S1 Plus/Ender 3 Max/Ender 3 Max Neo/Ender 5 S1/Ender 5 Plus/CR-10Smart Pro/SV04 Cover Room Storage 750x700x900mm
-
Smith
> 3 daySaved all my crappy prints. Shouldve bought it sooner!
-
AlfredBurns
Greater than one weekMy prints come out better since all the heat is kept inside and no outside winds/dusts can affect the print
-
JD
> 3 dayI received the item as described. It is well-made and fits my Tronxy X5SA printer. I measured the temperature in and outside of enclosure and the enclosure definitely traps heat. There is also a noticeable reduction in sound when its closed. The customer service replied quickly to my questions and they were very helpful.
-
Catharine M
> 3 dayVery happy with how this enclosure works with my Ender 3 Pro. It effectively blocks noise so I can be on conference calls when Im sitting next to it, and it traps heat inside so it doesnt spread out into the room. Theres about a 15 degree Fahrenheit difference between the inside and the outside of the enclosure when the printer is running, much lower humidity as well, by roughly 20%. Very nice! Keeps the resin toasty and dry for quality prints :)
-
Thomas W Roberts
> 3 dayA lot of small print problems just went away after I started printing is a tent. Id argue that this isnt an optional piece of equipment. I like this tent way better that a rigid enclosure because it just takes a second to pull it down from the support structure and then another second to put it back when you have to do maintenance on your printer. In the case of my CR-10 Id also recommending not pushing the table against a wall if you can help it. Being able to pull down the tent and walk around the back makes working on the hot end and extruder a breeze. In the case of a CR-10 the filament roll normally sits on the control unit and feeds to the printer from the side. I did that for a while, it does just barely fit in the tent. Then I printed a bracket and some guilds so I could mount the roll on top of the printer and keep the control box outside the tent. I like that much better. The roll touches top of the tent, but everything works just fine.
-
SpiDro
> 3 dayI bought this for residential use, 100$ is way too much for an enclosure. Had I been able to find a cheaper enclosure I would of gone elsewhere.
-
Robert R. Blanchard
> 3 daySo my printer is indoors meaning ac might hit it where I got it when it clicks on so a 10-24 hour print time means its gonna get hit a few times. I got this on day one so cant speak to how much a diffrence it makes printing at all. But I also got dust and cats in the house. I am in desert so this helps the dust and cat hair in the air at all times, and keeps cats away. It reduces noise but my printer isnt really noisy, I hope to never test fire proof, and I got my PETG so higher temp filiment hoping this will help out with that more then just keeping cat hair from getting in prints. Only issue nothing to do with its quality if I leave it open there is roomates cat who loves boxes who really really wants in that box lol. Oh be very happy it has gloves their cheap one time use and not very well made, I am xl did fit not very comfortable but by time I was done the gloves were torn up the ends on the metal frame are little sharp so do not try with out the gloves I saw what it did to the cheap gloves adn thought that could been my hands...
-
Bobby garcia
Greater than one weekEasy to assembles, instructions were pretty straightforward and helps when printing with ABS/ASA!
-
toddl
08-06-2025Printing carbon based filaments is really easy now that I can keep the ambient temps up- love it!
-
Cullen
> 3 dayBought this enclosure for all 3 of its properties; soundproof, fireproof, and temperature stability. Fireproof: Yet to test, and hopefully never. However it seems sturdy. The vinyl window seems to be the only flaw for fireproof. Have a smart smoke/co2 detected in the enclosure that will shut off power and text me if alarmed. Temperature Stability: I get really cold winters and hot summers so I wanted to keep the temperature stable and not leak heat into my studio. So far its kept the Temps stable and works as expected. Soundproof: It clearly dampens the sound that eminates from my Ender 3 Pro. I have made no hardware changes to reduce sound (yet) and it drastically reduced noise. However it still can be heard. So keep that in mind. I have it in a studio which makes it hard to sleep, however I run a fan and with this enclosure I dont hear it. There are two downsides. If you have any upgrades that change the width of your printer (like a side mounted spool) it will not fit. Secondly the outside of the enclosed has a sticky residue that WILL be a magnet to any pet hair. I dont have pets but it has ready collected slight dust. Overall I would recommend