Creality 3D Official Ender 3 Bed Upgraded, PEI Sheet Removable Magnetic Flexible Heated Bed Plate Build Surface Bed Cover for Ender 3 S1/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer 235X235mm

Easy to remove you prints from. Very nice.

Easy to clean. Prints come right off. By far the best upgrade for Ender 3’s

Was having adhesion issues with PETG... not anymore! Prints almost stick too well now. Was easy to swap for the ender 3 pro magnetic build plate.

Great product, stick well & released easily from the surface. The best.

I have been using this PEI Magnetic bed for a couple weeks now and I have zero complaints. The installation is simple, Clean the print bed with rubbing alcohol and a microfiber cloth, and carefully set the adhesive magnet down. The build plate does not feel flimsy, but has enough give to pop the print off. I love this one so much I bought a second PEI build plate for my other printer. It has great adhesion, but nothing is coming off that glass bed! In short, this is a great product! Buy this thing! Buy Two! It has made removing prints SO easy! :)

My printer came with a glass plate and I wish I would have bought this sooner! My first layers always go down perfectly now even on small and intricate parts. Large prints now have zero corner warping. I will be buying this again.

Gives a nice smooth base surface, adhesion is top tier.

I bought this to replace the coated bed plate that comes with the Creality Ender 5 S1. Unfortunately I can’t get any prints to stick to it. I’ve tried wiping it down with isopropyl, slowing down the print speed, increasing the bed temp, and a combination of those with no success. I’m using Creality PLA filament, which provided great results previously. No other printer settings were changed. Not sure what it might take to make this work, but for now I’m stuck.

This one has major adhesion problems; even after cleaning it with 99% alcohol to make sure the surface was totally free of any oils, debris, etc. The only good thing this one has going for it, is that its a sheet of steel, so its magnetic. Get the smooth gold colored one instead - it doesnt have the same problems this one does.

First off, I installed it correctly. I made sure my metal plate was clean from oils with 91% iso. alch. -I made sure the magnet was completely flat and gave it plenty of time to cure. a Full 2 days. I placed the steel sheet on the bed and warmed it to 60c for petg. I start printing and withing 10 mins the sheet has warped away from the magnet but also the magnet has warped around the edges and is not sticking to the metal plate at all. I have to clip the sheet and magnet around the edges to get it to work past 60c. It does work wonders when you can get it to not bend. Prints adhear well. Do i need spray adhesive? I was worried the magnetic mat might not stick. It didnt seem very sticky. Have not yet contacted support. debating if this is something i can diy fix/ user error or a real issue with product. Edit- 3/26/23 Nope does not stick, deforms at 60 degrees.