Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Voxelab Aquila

We all know capricorn tubing is the Cadillac, so I wont review the products. Its the shipping that loses a star. They shipped the compression fittings and the new nozzles in the same small ziplock bag. All the banging around caused the nozzles to deform at the tip. They are unusable. Its not a deal breaker, as I really just wanted them tubing, but extra nozzles are always good to have. For a few pennies, stick them in some foam or even tape them to a scrap piece of cardboard. Otherwise, the fittings, the cutter, and the extra silicone pieces are welcome in my spare parts box.

Gripper on extruder end popped tube out about 15 hours into a print. Ruined print. Tried to push it back in and it wont even stay in now. replaced with the second one, and it literally did it again.

Contrary to other reviews the silicone socks do fit on the stock creality heater block. The tube also appears to be genuine. The tube comes in a bag with creality branding and a capricorn sticker inside. The tube is 4mm, within 3 hundreths of a mm, outside and it is consistent both along its length and around. I dont have the tools to get a decent measurement of the inside diameter and calculating youngs modulus is too much trouble. The cutter. I have seen pictures of a cutter from capricorn that had their logo molded it. This one does not. There is an area that looks like a stticker could go there or the mold could have a logo added. The cutter works fine. It gives a clean cut and it is flush. All in all a fine product. However I have read articles that say Amazon will mingle product from several sellers and when one is ordered just pick one out of the bin. So, I can not guarantee that what you get will be the same as what I got.

I ordered this and have used something like it before but they sent plenty of tubing and the cutter works great

no esta mal pero no vale la pena comprarlo si no se adapta a tu impresora

After hours of listening to the bowden tube popping in and out of the garbage couplers they included, I realized that the capricorn tubing got chewed up so much its now unusable.

I bought it to replace my factory one, but after a few times removing it because of jams or filament snaps it broke off inside my feeding motor. Unfortunately its out of return/replacement time frame. Great product and would recommend it, just wish I could replace it

I have a Monoprice Mini V2 and this kit had all the parts I needed. I think theyre better than the parts that came with the machine. A good deal to deal with a small headache.

I ordered this Capricorn bowden tubing as an upgrade to the stock PTFE tubing on my Ender 3 V2. I heard that this teflon tubing would reduce the drag of the filament traveling through it and would also hold up to the temperatures in the print head better. I can honestly say that I feel like my overall print quality has improved after installing the tubing and it was well worth the money spent on it. It took me all of 5 minutes to swap out and I was also provided enough extra tubing to replace it again if I ever need to, so that was a nice bonus as well. I highly recommend this to anyone that is still using the OEM clear tubing on their printer.

A++++