Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Voxelab Aquila

A very simple and easy solution for stringing

Seems like this upgrade tube was smaller than the factory white tube. Filament got lodged in there 3 times and I had to continue to cut it down until it was unusable. Was new flexible filament too, not at all dry

I like that it comes with all the extra parts for the same price as if I just bought the tube. The silicone cover helps keep the heat in, but it doesn’t protect you from burning yourself. Overall it’s a great buy.

PC4-M10 Pneumatic Fitting is recessed on the inside and thin walled. When you install this on the extruder it makes it near impossible to feed new filament through it. The tip of the filament will just hit the edge of the lip left on the inside. You can see the new fitting in the photo (top) compared to the old fitting I luckily still had (bottom).

I had an Ender 5 stock for about 2 years, but after an unfortunate accident where I damaged my bed and the nozzle sheered off when attempting to remove it, I took the dive into all the upgrades I wanted. This was an easy choice, great price, and I am happy with the product.

Contrary to other reviews the silicone socks do fit on the stock creality heater block. The tube also appears to be genuine. The tube comes in a bag with creality branding and a capricorn sticker inside. The tube is 4mm, within 3 hundreths of a mm, outside and it is consistent both along its length and around. I dont have the tools to get a decent measurement of the inside diameter and calculating youngs modulus is too much trouble. The cutter. I have seen pictures of a cutter from capricorn that had their logo molded it. This one does not. There is an area that looks like a stticker could go there or the mold could have a logo added. The cutter works fine. It gives a clean cut and it is flush. All in all a fine product. However I have read articles that say Amazon will mingle product from several sellers and when one is ordered just pick one out of the bin. So, I can not guarantee that what you get will be the same as what I got.

Its a Capricorn PTFE bowden tube. It does what you expect. The little clip tube cutter is nice, and the silicone hot end cover thing is also nice.

no esta mal pero no vale la pena comprarlo si no se adapta a tu impresora

I brought 2 of these for my cr10 and the ender 3 3d printers I have and they work great and now I dont need to worry about the filament clogging on me anymore happy that my perchance was a good thing

I was having trouble with my bowden tube during long prints. The heat would get to it and it would become brittle and sometimes even crack right at the hot end. This caused issues. Not a full-blown clogged hot end, but filament would become clogged at the end of the tube. This caused a 2 day print to almost be ruined, which is when I decided to buy the capricorn tubing, as it has a higher heat tolerance. So far, its working like a champ with no issues.