Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M， PTFE Teflon Tube Cutter, Pneumatic Fittings and MK8 Socks and Extra Nozzles for Ender 3/3 Pro/5/Voxelab Aquila

Great price for this kit. The cutter alone was worth the purchase price

Night and day difference. Running Ender 3 V2. This was easy to install and I do see a noticeable difference with my prints. The stock tube slid just a little bit and was enough to cause some quality issues. This kit does not, it is solid. It did not come with clips, I won’t knock it though because there was no mention of them in the product description. Plus, I was able to use my existing ones just fine.

The bowden is great, very tight tolerance, can be a little hard to do a filament pull when swapping.

Was perfect

fits and prints.

no esta mal pero no vale la pena comprarlo si no se adapta a tu impresora

I was starting to have printing issues (clogging and stringing) with my Ender 3. This literally solved it in about 10 minutes. Easy to install and works great. My prints are back to coming out clean. It comes with enough tubing to do the replacement twice, so when this first one wears out, I can do it again without any additional cost. It also comes with 2 replacement nozzles and 4 fittings (probably different printer models). It also comes with 2 silicone boots for the hot end, but neither of them fit my printer.

I needed new tubing and Pneumatic Fittings for my Voxelab Aquila 3D printer and the pack allowed me to start printing. It works a treat and I would recommend it to anyone.

All the parts I needed worked great. Capricorn tubing, nozzles etc. I didnt buy this for the hot end silicone covers but while I was in there changing the nozzle I decided to replace the hot end cover but neither of them would fit. It was very close...but just not big enough. They would never seem to wrap around the edges perfectly. Since I didnt buy this for those no biggie. But since they didnt fit. 4 out of 5 stars.

I watched a lot of YouTube videos recommending purchasing this kit, or one like it, as a necessity for upgrading a Creality Ender 3 v2 soon after getting it. I did not see why I would need to repair or upgrade my printer so soon after getting it. Now I know better. My printer is about four months old, and I had not experienced any problems printing. Still, the sheer volume of videos talking about this convinced me to take the leap. I can’t tell you how glad I am that I did take the leap. It turns out both my boden tube and nozzle were shot. I couldn’t believe it, but there was the evidence staring me in the face. I don’t know if trouble was hours or days away, but I do know from life experience trouble rides a very fast horse. This kit - with the help of a YouTube video - is very easy to install if you have never done so before. A final word of caution - this is easy to do, but in terms of accuracy this is major surgery on your printer. Don’t skimp on recalibration after the installation is done. If not, you may see print quality suffer for it. Just hurry up, buy this kit and install it already!