ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
Guillermo J.
> 3 dayTried the same 1/6th scale figure print file that came out flawless on another brand of resin. On this one the details were lacking, even with lower exposure... parts just looked like blobs, in particular the fingers came out real bad. They look like swollen vs the othe resin that printed them with fine detail. On top of that, certain supports didnt grip to the plate, and some areas of the print wouldve required a considerable amount of work to repair the damage. In short, yes its cheap, but results looked cheap too.... so, if you want to print round blobs with coarse details then perhaps this resin is the one you need, if you need to print fine details like 1/6th scale action figure hands, probably look elsewhere.
-
DJ
Greater than one weekThis resin was easy to work with but I did notice some warping but that might have been do to the amount of support or lack there of that I was using so I would suggest depending on what your printing you use medium to heavy supports.
-
Fima Egorov
> 3 dayHad to try them!
-
Nunya
> 3 dayIt worked great, but while it was quite clear right after printing, after a couple of days on the window sill to cure in the sunlight, it turned rather orange. Still a nice product, but dont expect it to be whitish/clearish like in their pictures.
-
john marsh
> 3 dayDoesnt smell super bad but still noticeably better than other and older brands of resin
-
Rik
17-11-2024I am printing on a Mars 2P. The time recommended by elegoo is 3 seconds. My first print failed, so I bumped it up to 4s. This print failed too. After doing exposure tests, I found the proper time to be between 6-7 seconds. This takes it down to RGB screen territory.
-
A. Myers
> 3 dayDetail is hit or miss first batch was great...This batch not so good, detail was lacking this time around.. no idea always hit or miss. Price is getting up there I will go with a different brand next time that has 2x the volume and is a little cheaper.. Since IPA is so expensive ive slowed down on my printing work and.... Each print counts!!!
-
Rob Ellis
> 3 dayI loved it. Wish I had gone with the 1000g instead of the 500. Very low fumes from the resin as well. I was surprised.
-
Michael Kidd
> 3 dayGreat resin. I have bought 3 liters of the grey and 1 liter of the clear in the last couple of months. Made hundred of prints. All have come out great. Only fails have been my fault. And my DnD group loves there figures too. Would recommend to anyone.
-
Will
> 3 dayHad to experiment with different exposure times to get the black to cure right as opposed to other resin colors, but overall solid strength, color, and quality
