eMylo Smart WiFi Light Switch Wireless Relay Switch Module Remote Control Home Automation Timers Compatible with Alexa Echo Google Home iPhone Android App 2 Packs

The wire clips are a good idea but poorly made. Go with the Sonoff brand.

The install went great installed 3 in less than 15 minutes. Had to cut up about 3 cords but in the end it made them smart cords. Had sonoff switches before this, these make me feel a lot better because the high voltage lines dont come as close as the sonoff switches do. The app connects to Alexa perfectly and changing the name of the device on the app immediately changed it on amazons side allowing me to start turning off and on my lights with the correct name.

Was not what I thought it was My mistake

I love this switch! I bought a second unit because the first one worked great and allowed me to control devices in another room. I have one connected to an exhaust fan and the other to a dehumidifier. I can now control each from my Android phone. With the addition of a camera, I can easily see and control the conditions without having to run into the room. Correct placement of the switch and I can bypass automatic temperature and humidity controls in an emergency. The clips for the wires were a little confusing and i didnt use them on the first switch. I thought they were garbage because they didnt hold the wire tight. When the second switch arrived, my nephew showed me that I was not opening the clips all the way. From that point it took us under a minute to strip wires and connect to my phone. That simple. Setting up schedules are a little grueling and the app definitely could be better. But it works and with time and creativity you can accomplish most anything. (48 entries for an action every half hour).

I bought this because I wanted to see if I could control my new pool light using my Amazon Alexa. I had recently changed out my light to a 12” Pool Baron nicheless LED pool light, so I needed something that would switch both the hot as well as the neutral lines at the same time. More importantly, I needed something that would be powerful enough to be able to pick up my wifi while being installed in a metal circuit breaker box located outside of my home. I chose the eMylo because they use the Tuya WiFi module, which is supposed to be the best as far as strength. The breaker box is outside, is 100% metal (with a 2nd metal cover that covers it), and is about 40-50’ from my WiFi router. I had tried others but they could not pick up the WiFi once the breaker box cover was closed – the eMylo was the only one that worked! I changed out the regular on/off power switch to a DPDT on/off/on switch so I could turn the light on manually if needed, but thanks to this switch I am able to use the Alexa with the Smart life app. Sweet! I had also had some concerns early on and eMylo was very good in helping me out. Five stars!

Excellent items

I could not get this to work. It kept tripping the GFCI on the circuit. Installation was easy and the setup looked pretty straight forward if it ever got power before tripping the GFCI.

So I had tried several other products, such as the popular Sonoff brand switches. I absolutely could not get them to work at all, even after contacting their support. I ended up returning those other brand switches. So I ordered these on a whim, they are a new product, and when I ordered there were NO reviews posted yet. Risky I thought, but oh well. Upon receipt they were nicely packed, with good quality quick connectors instead of crappy wire nuts but - first complaint here is that while the end caps are removable, there is no point to removing them. The wires are soldered to the PCB inside the unit - personally, I would rather them forgo the quick connects and wires, and just put a screw header on the PCB for connecting whichever wiring you need to. Nonetheless, the ends of the wires were pre-tinned with solder to keep them from fraying which was a nice touch, and the connectors they provided were of good quality - but they dont work well on high AWG wire (such as 12 AWG). They did work good on smaller AWG however. In my use case, I was putting these switches inside of fluorescent fixtures, where the internal wiring is 18 AWG, but the home wiring is 12 AWG. So I was able to use the connectors for the fixture side of the switch, but not for the internal house side. It would not bite onto a solid core 12 AWG wire and stay attached. Just something to note if you are using these as most people would. Anyways, those issues aside, they were fairly easy to set up - I used some double-sided foam tape to attach them to the inside of the fixtures, and was able to get them wired up fairly quickly. You could do this and then set them up in-situ, but I decided to get them setup prior to wiring, and I am glad I did. Thankfully I have a quick-test so I can connect devices to mains for situations like this (search for CLIFF Quick Test on Google, I cant recall where I ordered my US version from). This enabled me to connect to mains voltage at my workbench and get them configured and synced to my account prior to installation - definitely do this if you can. As for setup and linking: The instructions are pure garbage. Throw them away and do this - this was the ONLY reliable method I found to configure. 0) Before starting, you absolutely positively you must have a 2.4 GHz only wireless AP set-up. I did this on my router by setting up a guest network for all of my smart devices on the 2.4 GHz band only. This ensures the device only connects to that SSID and that frequency, and wont complain in the app if you have a dual band router. 1) Connect your cell phone to the same 2.4 GHz AP you are using for the smart devices. Install the Smart Home app if you have not already and get your account set up. 2) In the app, use wall switch for adding a new device type, and get it to the point where it says to make sure your device is blinking during the on screen setup. 3) Hold the button down for at least 10 seconds. It will click several times. After 10 seconds, release the button. 4) Immediately after release, count for 1 beat, and then hold in the button again for an additional 10 seconds. 5) Click the confirm/next button in the app to tell it your device is blinking. 6) Wait for the phone to finish setup - the switch might click once or twice. Be patient! Sometimes it takes the full 2 minutes. 6b) If somehow this doesnt work, return to step 3 and repeat, making sure you are following the button holds exactly. 7) It should be set up - test and make sure the switch clicks when you press the switch on screen on the app. Rename the device as desired - it will probably come up named by default with chinese characters. 8 - optional) Link your smart life account with your google or amazon account according to those providers normal process. I did this with google - and then afterwords I told google home to resync devices. Congrats, done! Now install them in the fixture (turn off your power at your breaker panel first!!!) and restore power, and give them about 30 seconds or so to reconnect up, and then test them out. Note: you could do the setup in-situ if you cannot connect before installing, its just going to be more difficult if you are on a ladder arms above head :) Oh and last bit - once all of this was done, they are working GREAT - they respond extremely fast - I also inspected the components, and they used decent quality components - the relays seem properly sized for the task, etc. Just make sure you adhere to their specifications - 10 A MAX - I wouldnt go more than 8 amps to give yourself a buffer - I am using on lights, so probably an amp max for me. 4/5 stars due to poor instructions and other minor complaints. If they update the instructions and change to screw post connectors, I could give this 5 stars.

Se dañan muy rápido, o vienen dañados de fabrica. No lo recomiendo.

Easy to use. Works like a charm.