Wishlist(0)
tiktokgroups.com
Categories See All >

Monoprice 103844 250ft 12AWG CL2 Rated 2-Conductor Loud Speaker Cable (for In-Wall Installation), White

(1946 Reviews)
Price
$65.96
Quantity
(10000 available )
Total Price
Share
83 Ratings
74
6
3
0
0
Reviews

  • dnsh

    > 24 hour

    Easy to work with. Flexible. Sleeve removes easily where needed. Very good sound quality everywhere I’ve used it.

  • Charles Mattox

    > 24 hour

    This is a quality cable. 12 gauge is perfect for a excellent for my 5.1.4 speaker layout. Cables are fished through the walls for a clean look and this is what the cable is rated for. Remember this is a THICK cable so when routing take that into consideration.

  • Matthew

    > 24 hour

    12 gauge wire. This is true 12 gauge wire. It is very thick and 100% copper. High quality speaker wire.

  • Sangeetha Venkataraman

    > 24 hour

    Great quality wire has plenty of strands. My speakers sound great with these. No issues.

  • Sneaky Pete

    > 24 hour

    Works amazing!!!

  • Jonathon Bentley

    > 24 hour

    great wire at a great cost. I ran these through my walls for full 5.1 bi ampe setup and it works great. quality wire and sheathing to protect the wire and get quality sound.

  • HGILL

    > 24 hour

    Outside sleeve is very loose and makes it hard to pull cable threw walls.

  • S. Gadicherla

    > 24 hour

    Ok

  • Chuck

    > 24 hour

    Heavy duty, works great.

  • JB

    > 24 hour

    Solid copper speaker cabling. Didnt think the foot markings would be as helpful as they ended up being! The white jacket is quite loose around the two wires but didnt cause a problem with my install. Durably coated yet easy to strip.

Get the most out of your home audio system with high quality, oxygen-free, pure bare copper speaker wire from monoprice!

this speaker wire features two conductors made of high purity (greater than 99.95% pure), oxygen-free bare copper. Pure bare copper is a superior conductor to the copper clad aluminum (CCA) conductors used in most other inexpensive speaker wire. Cca is only about 68% as conductive as pure bare copper. This additional resistance is added to the impedance of your speakers and can negatively effect The sound.

for the wire to have no audible effect, The total wire resistance should be no more than 5% of the lowest impedance of your speakers. Even speakers rated for a nominal 8-ohms, may dip to as low as 4-ohms at some frequencies, which further reduces the total cable resistance allowed in the wire. Using pure bare copper speaker wire ensures that the total load put on the amplifier remains as close as possible to the impedance curve of your speakers.

for example, a 16AWG 2-conductor pure bare copper speaker wire has a total resistance of 0.803 ohms per 100 feet (both directions must be considered). by comparison, a 16AWG 2-conductor CCA speaker wire has a total resistance of 1.181 ohms per 100 feet. Assuming 4 ohms is the lowest impedance of your speakers, a speaker wire run can be no more 0.2-Ohms total. 20 feet of 16AWG pure bare copper would be 0.1606 ohms, well under the 0.2-Ohm limit. On the other hand, 20 feet of 16AWG CCA would be 0.2362 ohms, well over the 0.2-Ohm limit.

each conductor is jacketed with color-coded PVC for easy polarity identification. The entire cable assembly is jacketed in a white, CL2-rated PVC material. The CL2 rating indicates that the cable complies with fire safety and insurance requirements, making it safe for use inside the walls of residential class buildings.

Related products

Shop
( 3023 Reviews )
Top Selling Products
Home
Categories
Cart (0)
Messages
Account
0 Cart Item (s)

Your Cart is empty