Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Helen House
> 24 hourNo complaints!
-
Ediz
> 24 hourSinceramente no tengo punto de comparación con otras pastas, pero hasta ahora cumple su función muy bien
-
P.L.
> 24 hourSpread thin coat. DO NOT USE TOO MUCH !
-
steve norris
> 24 hourStill the best paste to use
-
Bea
> 24 hourThis is really great when youre placing your cooler on your cpu. I used this with my intel i9-9000K and the NZXT Kraken water cooler and it worked well for me. It has a lot of product in the syringe, if you need to use it on several computers. A must have for building computers or upgrading them.
-
Zach Thomas
> 24 hourKeeps temperatures under control even in higher end applications. I have an overclocked Vega FE with the blower cooler drawing about 280W and temps stay well within a reasonable range. No reason to spend 3-4 times as much for paste that’ll do the same thing!
-
Marty M.
> 24 hourworks as it should, this brand always works.
-
Luis HI
> 24 hourOn my cpu as we speak. It does the job.
-
Aristarco Palacios
> 24 hourAl escribir esto aún no he probado la pasta. Sólo califiqué calidad en empaque y entrega. En cuanto pueda emitir una opinión modificaré esta revisión.
-
Jacob McCreary
> 24 hourThe compound was easy to use. I took apart my original model PS4 and reapplied this compound, have a lot leftover as well.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
