Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Ignacio Halvorson
> 24 hourI used this product to help keep the CPU and GPU cool, after I had to replace the fan on my Dell Inspiron 17-5767. The paste is great and works like a charm.
-
Carolyn
> 24 hourBest thermal paste there is. Great temo control
-
Josh Campbell
> 24 hourNot much to say about it- Its Arctic Silver, best thermal paste you can buy. Love that it comes with an applicator. Sure saves wear and tear on my credit card. Shipped fast.
-
JennyCuppyCake4
> 24 hourUsed this for my PS4 which was overheating. It was easy to apply and worked perfectly.
-
Russell A. Fry
> 24 hourWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
-
Moses S.
> 24 hourThe spread method is the best.. this item comes with a spreader use it
-
Kevin Garcia
> 24 hourMy temps are steady at 46-49 degrees while gaming
-
MT
> 24 hourSo far so good.
-
Leaf F.
> 24 hourWorked well! CPU is keeping cool :)
-
Vickie Conroy Jr.
> 24 hourDoes what it says.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
