Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Vrck
> 3 dayEXCELENTE PRODUCTO
-
JL
> 3 dayEasy to apply, works efficiently.
-
John Dunkerley
> 3 dayLiked the thermal paste. Worked just fine. You dont need a whole lot. I used the included spreader to help apply the paste.
-
Sean M
> 3 dayProduct did NOT come with spreader as advertised.
-
Antonio
Greater than one weekSiempre utilizo esta pasta termica en los servidores Hp de producción empresarial y aunque su coste no es bajo nuca he tenido ningún problema va perfecta.
-
Thefireball
> 3 dayThe only thermal paste Ive ever used.
-
Ediz
> 3 daySinceramente no tengo punto de comparación con otras pastas, pero hasta ahora cumple su función muy bien
-
Randall Stock
> 3 dayI have used this many times in past projects and works great.
-
Just-Mike92
> 3 dayI’ve been using Arctic silver 5 for years now. It’s the only thermal compound that I’ll use at this point. Works great for water cooling or air cooling and doesn’t dry out fast. This particular lot of it comes with a spreader so that’s a bonus but personally I’ve never had a use for one. It’s reasonably thick but spreads nice. As an added note, this also works well to attach a waterblock to a GPU.
-
M. L. Griswold
Greater than one weekWorks as advertised
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
