Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Fausto Vargas
> 3 dayPero su calidad es muy buena le bajo la temperatura a mi procesador
-
cristian
> 3 dayEasy to use syringe. Comes with a spreader. Dropped my CPU temp by 5 degrees
-
Sterling
> 3 dayWorks as described what else is there to say!
-
WILLIAM H JOYCE
Greater than one weekAMD RYZEN to FAN conductivity
-
Timothy
> 3 dayDoes the job
-
Henk
Greater than one weekAs described , came in time.
-
…
> 3 dayBought this for my Xbox One S that I had to take apart and reassemble, the thermal paste applied on the Xbox One S wasn’t the best and didn’t last as expected so I decided to buy some instead of paying 300$ for another console. Works perfect, My Xbox heats up a little bit but it doesn’t shut off anymore or just freeze. Basically works like new again.
-
Kris
> 3 dayWorked great for my ryzen 3 processor and my Asus rog phone 2
-
Ahlam
> 3 dayThis does not work with inspiron Dell laptop
-
Shaun Carroll
> 3 dayThis stuff is great and is the only thermal paste I have used the last 20 years I have been building PCs at home.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
