Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(274 Reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Jennifer Rudolph

    > 3 day

    Keeps my processor very cool. It is very big though. You have to watch out that it will fit because its massive. The second fan has to be mounted a little high so it doesnt hit my ram but its the best cooler out there I think.

  • Aubert Jeremy

    > 3 day

    Nikel faite gaffe a la taille du boîtier.

  • Andrew S.

    > 3 day

    I was looking forward to upgrading my PC and using this cooler, as it was recommended to me by a friend.

  • realmaximus

    > 3 day

    ... im wahrsten Sinne des Wortes. Der Kühler ist riesig. Ich kann nur empfehlen auf der Seite des Herstellers nach Kompatibilität bezüglich Gehäuse, RAM und Mainboard zu schauen. Ich selbst habe ihn auf einem AM5 Sockel. Wichtig zu wissen ist, das der vordere Lüfter über den RAM Bänken klemmt. Ist der RAM zu hoch, muss also der Lüfter etwas höher geklemmt werden, was die Gesamthöhe der Installation erhöht. Im Corsair 750D ist es aber kein Problem. RAM ist der Corsair Vengeance (flache 32mm Höhe).

  • Mr. P. Connolly

    > 3 day

    This is the second NH-d15 i have bought. Does as good a job, as any other cooler bar non. I have had an AIO cooler in the past, and had to replace it under warrenty, however, the replacment is still sitting in its wraper and wil never be used. To noisy and prone to failure, compared to the NH-d15, there is nothing to go wrong it just works. I have upgraded my PC from an I74700k to a new AMD 3700x. I had the wraith cooler on for a couple of days because it was pretty. However, it was to noisy and having used the NH-d15 before i new i was just either going to buy the brackets for my old one or just buy a new one. The new one is a big improvment over the stock cooler for noise levels and tempretures.

  • Mr Irwin

    > 3 day

    Im pairing the Noctua NH-D15 with the i9 9900k and the results are fantastic. My CPU is running stable at 5 GHz on all 8-cores with average idle temps between 32-37 degrees C and 50-65 degrees C during gaming. For other workloads, it typically is in the 40-49 degrees C range. I would highly recommend using the supplied thermal paste from Noctua as well since it is a high-quality paste that is non-conductive. It also was able to work with Corsairs Dominator Platinum RGB memory. The only modification I had to make was that I moved the first fan to the opposite end of the heatsink but in terms of performance, this has had no negative impact. If you prefer air-cooling like I do and want fantastic cooling, look no further. I also have to commend Noctua for exceptional packaging of materials They protect all of the components in the box with a large amount of padded protective material and everything comes in a fairly rigid cardboard box which protects the packaging contents. The product itself and even the package it comes in scream quality. If I build another system Ill buy another NH-D15, they truly make the best stuff.

  • Jordi

    > 3 day

    Esta empresa Austriaca lleva años en la cima de la ventilación por aire, tanto en sus disipadores como ventiladores. Lo malo es que siguen teniendo este color crema con las aspas marrones que no pega con nada puesto que las torres suelen ser o negras o blancas, por lo que si sois de los que llenáis la torre con absurdas lucecitas cual discoteca y os tira para atrás el color, tenéis 3 sencillas opciones.

  • benjamin

    > 3 day

    I was so impressed with this CPU Cooler that I couldnt help get a second one for my next PC build for my sons PC I am building.

  • 田坂

    > 3 day

    使って4ヶ月くらい経ったのでレビュー

  • Nicole Compagnone

    > 3 day

    This thing has dropped temps on my 5900x from 85c down to around 70-75c while chugging 200amps across a full core load. And the RAM clearance on the fins is great! Only issue I came across was mounting the middle fan since space was tight on top of my case. Also if you have tall RAM do not expect to be able to mount the front fan either. But even without it my temps are still extremely good

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Super Lucky Shop
Super Lucky Shop
( 771 Reviews )
Visit Store
Top Selling Products