Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Racing guy
> 24 hourI do love the install hardware, ease of use, spring retention system. But this thing is HUGE. It makes removing the gpu/ram/headers for fans under it quite a pain. Overall I would recommend this if youre into air cooling and you like overclocking. Cools very nicely, but youll have to remove the fan where you put your hand to press the pcie retention clip.
-
bitlefelder.de
> 24 hourKühlt einwandfrei und leise. Dazu einwandfreier Herstellerservice - bei Mainboardwechsel / Sockelwechsel kostenlose Zusendung von neuem Befestigungsmaterial.
-
Mr. Daren Abbott PhD
> 24 hourThis is the older version of Noctua they do not include the LGA 1700 brackets! DO NOT buy from this supplier if youre looking to get the newer revision of the fan! Do not be fooled by the description claiming it includes the 1700 kit, it doesnt!
-
Sizziano
> 24 hourProbably the best air cooler you can get right now. Highly recommended.
-
Pakman
> 24 hourCools as good as a cpu waterblock depending on ambient temps; 5820k 4.5ghz @ 1.265v average temperature of 70.83c with 1 hour of intel xtu stress test.
-
Mike Debany
> 24 hourSuper easy to install...
-
Michael Rhys Morgan
> 24 hourReally high quality product, replaced my Corsair H100i GT and my system is much quieter for it.
-
Frank
> 24 hourIt keep my i5 9600k at very low temperatures all of the time.
-
J. Preece
> 24 hourYeah it’s HUGE, but this bad boy dropped my CPU temp between 20 and 40 degrees Celsius over the Coarsair water cooler. Maybe my water cooler wasn’t working right, but now even under heavily load the CPU is hovering in the low 50’C range. Not only superior cooling but it is SO much quieter than the water cooler. I barely hear the PC. If your case is big enough, get this!
-
Brian
> 24 hourProduct worked better than expected. I did a modest overclock with my i5 7600k. Temp stays around 60C. Product is quite large but fit in my Corsair 650D case with ease. I have an MSI gaming 3 z270 board. I was able to install my NVME SSD with the fan installed. It covers my memory slots but allows ample room for my 1080TI in the first pcie 16x slot. Many boards this fan will cover the first slot which is usually 1x slot but in the case of my board the NVME slot is where the 1x slot would be.
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
