Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • bkpt

    > 3 day

    Eigentlich ist schon alles geschrieben worden:

  • Kenneth Michael Niccum

    > 3 day

    Amazing!

  • Frequentbuyer

    > 3 day

    In my opinion, the NH-D15 is overrated. This is because my i5-7600k CPU has only drop at most 4ºC after replacing the Hyper 212 EVO with the NH-D15. Although the NH-D15 is very well-built, it does not perform a lot better than the very cheap Hyper 212 EVO. To me, I am very disappointed with it as I have spent $90 just for a few degrees of temperature drop.

  • Garza

    > 3 day

    Es un ventilador para CPU con poquisimo ruido y altas prestaciones, facil de colocar en la torre aconsejada para este modelo.OK

  • Matthew

    > 3 day

    Replaced Corsair H100 with this cooler (It was getting pretty long in the tooth and developed a squeak in the pump). A bit warmer with idle temps but when under load actually cools better than the H100. My PC is set up in a CM HAF XB its not really meant to be a quiet rig, its more like a test bench type design, very airy very open.. despite that, replacing the H100 with this actually reduced my noise levels. I didnt install the low noise adapter as its not needed.. unless youre going for completely inaudible. Would recommend for any application as long as you can fit it in your case. On my particular motherboard one of the cooling towers actually sits above one of my RAM DIMM slots but if youll notice there is a cutout at the bottom of the towers that actually allows quite a tall heat spreader on your ram. Im using corsair vengeance and there is room to spare, to give you an idea. If youre concerned with compatibility be sure to check out the notcua website, theyve got a pretty exhaustive compatibility chart that you can reference to make sure it works with your motherboard. Also check the specs for your case, there will usually be a metric for CPU Cooler Clearance or something along those lines and just bounce that off the size of the NH-D15.

  • Jasen Gordon

    20-11-2024

    I ordered this cooler since my old AIO Corsair liquid cooler pump gave out after 5 years of operation. I read the reviews for the Noctua and it appeared to be the best rated all around. Order was received promptly and the item was in excellent condition. Installation was a breeze, the only negative thing was that the middle fan was hard to attach to the radiator due to the lack of space between the bottom of the cooler and the top of the video card, but eventually it worked out. I have one of the largest cases available on the marked, the Corsair Obsidian D900 and thus there was plenty of room for this huge cooler. I am not sure if it will fit small or mid cases. The performance of the Noctua is better then the previous liquid cooler by a large margin: when new, the Corsair was idling at 35 degrees C and at full CPU load about 75 degrees, the Noctua idles at about 29 degrees and goes up to 50 degrees at full load. I would recommend the Noctua NH-D15 highly. One other benefit is that the Noctua is whisper quiet, while the Corsair was fairly noisy.

  • Major Howe

    > 3 day

    Ottimo dissipatore. Già dallapertura della scatola ci si accorge della qualità Noctua, comprende istruzioni, pasta termica e piastrine di montaggio sia per intel che per amd.

  • 007

    > 3 day

    This is a cooler for 7700k like hottest CPU. With reputed water cooler and 3000 rpm fan max. temperature was 82C. Now with Noctua NH D15 and Noctua stock fan max. temperature. is 73C. But there are 2 facts that everyone should know. I bent the cpu socket pin by mounting most popular cheap heat pipe tower cooler. The most popular brand is not Noctua. So be aware from most popular air cooler. The mounting system of the D15 is the best among known competitors. 2nd this cooler is not for every motherboard. This cooler is specially not compatible with many micro ATX board. Check the Noctua website before order.

  • BSeeYa_luvs

    > 3 day

    Great cooler! :-)

  • 匿名

    Greater than one week

    Very easy to set up, and a highly surprising change in temperature. With the stock cooler, load temperatures were 85*c~ while with this cooler it never goes higher than 45*c. Youll need a pretty big case for it, though.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
LCK your love shop
LCK your love shop
( 0 reviews )
Visit Store
Top Selling Products