Noctua NH-D15 SE-AM4, Premium Dual-Tower CPU Cooler for AMD AM4 (Brown)

Fantastic. I was able to drop my temps around 15 degrees C compared to the stock wraith spire. Running my ryzen processor at 3.8 ghz at 60 degrees C during prime95 stress testing. On Idle its running around 30-35. Playing PUBG or Overwatch on max settings my processor is running around mid-high 40s to lower 50s.

Installed with my 5800X to replace a terrible cheap fan I installed as a stopgap. WORKS GREAT. SYSTEM RUNS ICE COLD. USE A MESH CASE FOR THE BEST AIRFLOW! I CANNOT OVERSTATE THIS.

Funciona muy silencioso ,muy grande y fácil de instalar

Ryzen 3700x idle 40C with the Noctua fans set at 70% speed at 80C. CPU never exceeds 65C on full load running Cyberpunk at 1440p. The loudest component on my pc becomes the external HDD. Full price is worth the supreme cooling and noise reduction over the stock AMD Wraith cooler.

This CPU cooler did not for the Asus TUF motherboard as listed in their specs. was a waste of money.

I know theres no point to get this since the 2700X comes with its stock cooler but I render a lot of videos and at 1.3V and 4.0GHz, the CPU temp would climb into the 80s Celsius and I didnt like that. With this, it only goes to 65C at the same voltage and clock speed. Wont ever get hotter than this.

This is one of the easiest to install CPU coolers I have ever used. Locking it onto the mobo didnt give me that Im about to break something feeling. That enough was worth 3-stars. I chose the Noctua cooler after seeing good reviews in a side-by-side comparison video. It is quiet, works extremely well and I am happy and impressed. The only drawback for me was that my new case didnt have room or a place to mount the secondary fan. Extremely happy, I highly recommend for your next build.

Easy replacement of stock Ryzen 7 2700x cooler. Everything needed for an AM4 socket was included. Compared to the stock cooler of my CPU, with both fans installed, the NH-D15 reduced core temperature by 20F at idle state with case cover off. The cooler is gigantic. No problem with clearance on the RAM. Fan location (height) on the cooler is adjustable. The clips which hold the fan to the fins are very flimsy. This, in combination with the weight of the fan allows the fan to sag. Worst case, this clip can contact the GPU card and cause a short. Clips should be stronger and coated with non-conductive material in my opinion. With both fans installed, I could not put the front cover of the case back on because the second fan will sit on top of the ram (about an inch higher than the fins of the cooler). The fans make no noise, perhaps because their top speed is 1500rpm. The slow speed of the fan somewhat diminishes cooling capacity at full CPU load. Using a cheap box fan, with the PC case cover off, I could further reduce operating temperatures under high load.

Solved all my Ryzen 3900 thermal throttling woes

When I opened the box, I thought ups mistakenly shipped a lawnmower carboretor to me. This thing is massive. Make sure you go to pc part picker and make sure this thing is compatible with your other pc parts. I use this for my Ryzen 7 1700 and keeps it really cold. The fans are almost completely silent. Installation was a breeze. U just have to figure out which brackets it mounts on will work for your motherboard. It comes with two sets of brackets