Polycarbonate Clear Plastic Sheet 12 X 18 X 0.0625 (1/16) Exact, EasyRuler Film, Shatter Resistant, Easier to Cut, Bend, Mold Than Plexiglass. VEX Robot, Hobby, DIY, Industrial. Glass Replacement

If you intend to use this as a flat surface, it should work ok. I tried to glue and clamp it on a Chevy instrument panel cluster which is not flat and it kept snapping off even after clamping for 48 hours. The old broken cover I took off and was trying to replace with this acrylic piece was about 1/2 the thickness of this 1/16 thick piece, so just wished I could find a 1/32 thick product. Or like my headline states, I wish it was more pliable. I finally used a slow setting epoxy which did run on the inside of the acrylic piece, but when I left it clamped for 4 days, just to make sure the epoxy had cured, it did hold this acrylic piece in a curved positon. Not a perfect job, since I had epoxy that ran and several scratch marks from trying to clamp several times. Basically, it just was not thin enough or pliable enough for my project. It will probably work fine for any project that requires a flat acrylic piece. Not permanently curved.

The fine print says not to expose to sunlight or water. Unfortunately I bought it to repair a bird feeder so it will get both. So it probably wont last for years, but if it gets a couple of seasons it will be worth the price.

Great product I bought it for my serving tray on my ottoman the mirror broke years ago and I couldn’t find a mirror that exact size so this works fine,I put fabric over it so it’s beautiful. You’ll need a special tool to cut it or just use a blade saw

We were lucky, the size is absolutely perfect for our need, the thickness is certainly going to keep our dogs from running through it (they had created their own doggy door though our screen), and unless you are looking closely it is not noticeable (almost perfectly clear). I used some quake wax to hold it against the frame, anything sticky should work as well.

Just received this sheet and, within 10mins, its cut to size and on my tank! Looks great and was very easy to cut. I used a cheap box-cutter. Scored it several times and snapped the cut. Works great. Serves its purpose well!

Perfect thickness for modding an Xbox or PS. Easy enough to score and break to shape, just be slow and patient with the process. Dont use acetone or isopropanol to clean (unless you do the ol acetone vapor polish), polycarbonate doesnt like those chemicals too much. I was lucky not to mess up my already cut piece because I accidentally used methanol with a low amount of iso in it to clean before installing.

This product was raw material for two 4 inch squares I used to stop an air leak from two light cans that were blowing hot air from the attic into the kitchen.

Item was exactly as described. It was square 90 degrees on all 4 corners.

Happy with my purchase

This came in just about exactly the size I needed. I only had to cut a couple inches off one end. I was worried about doing this because on previous pieces of plexiglass I ended up breaking the piece. No worries this time tho because this brand cut beautifully.