Polycarbonate Clear Plastic Sheet 12 X 18 X 0.0625 (1/16) Exact, EasyRuler Film, Shatter Resistant, Easier to Cut, Bend, Mold Than Plexiglass. VEX Robot, Hobby, DIY, Industrial. Glass Replacement

(0 Reviews)

Price
$9.95

Quantity
(10000 available )

Total Price
Share
98 Ratings
80
14
2
2
0
Reviews
  • Mandy

    > 3 day

    I bought this to cut to make a window in a chicken coop, cut nicely, was exactly what I was looking for for this particular job.

  • ME

    > 3 day

    Good

  • Joyce

    > 3 day

    Just received this sheet and, within 10mins, its cut to size and on my tank! Looks great and was very easy to cut. I used a cheap box-cutter. Scored it several times and snapped the cut. Works great. Serves its purpose well!

  • JEJ

    > 3 day

    The polycarbonate sheet was purchased to make a chip and dust deflector for my auxiliary cabinetsaw. It came with a protective film obn both sides, which was very easy to peel off after cutting and bending, and left a crystal- clear surface. The sheet was cut with both table saw and bandsaw; it was drilled; and, with the help of a heat gun and by clamping to the bench and applying pressure via a flat board, bent. The sheet went through all these operations easily, with no cracking or splintering, and the edge was good enough that it needed no filing or sanding at all. Great for its intended use.

  • bookemdanno

    > 3 day

    Works great. It does have a bit of glare, but not noticeable give where the picture is hanging. Had to cut it to size, and this meant I needed to deeply score it with an exacto knife until I could snap it along the cut line. It worked but it was a bit of work to do this.

  • Glock40

    > 3 day

    Item was exactly as described. It was square 90 degrees on all 4 corners.

  • Ron K.

    > 3 day

    This product was raw material for two 4 inch squares I used to stop an air leak from two light cans that were blowing hot air from the attic into the kitchen.

  • Katie

    > 3 day

    Bought this product by mistake. It is very durable. Customer service was very fast in issuing a refund.

  • Celisa Scroggins

    > 3 day

    Exactly what I was expecting when I ordered it. The edges were a little roughly cut, but otherwise exactly what I wanted.

  • Toby Delta

    06-06-2025

    Its a little bigger than I expected. I got it for a frame I have since the glass broke and I had to trim a little bit off, about a courter of an inch. On the bright side its sturdy and made of a good material.

Polycarbonate is a superior clear plastic sheet compared to Plexiglass/Acrylic
Sheets can easily be cut, milled, and drilled with any standard tools (hacksaw, jigsaw, snips for thin sheets, standard drill bit, etc.) without the cracking or fracturing you would find in Plexiglass. Additionally, Polycarbonate can be bent neatly. Thin sheets can be bent cold with sheet metal techniques, while thicker ones are easy to shape with the help of a heat gun. It is also perfect for thermoforming or vacuum forming. This makes Polycarb perfect for both DIY and professional projects around the home, shop, or for manufacturing.

Shatter Resistant & Strong
Polycarbonate has great mechanical properties, making it often considered as a safer option than glass sheets or acrylic sheets. Tensile Stress: 63 MPa. Flexural Stress: 90 MPa. Rockwell Hardness, R: 120

High Optical Clarity
Light transmission of 88-90%, tested at 2.54mm thickness per ASTM D1003

Electrical Resistivity
Volume Resistivity: > 1.0E15 Ohm-cm

Protective Film on BOTH SIDES
This product is shipped with a thin protective film on both sides. Please peel this off to expose the clear sheet. You can mark onto this film while working with the material, then remove it to expose a pristine surface.

Related products

Shop
( 1925 Reviews )
Top Selling Products