Polycarbonate Clear Plastic Sheet 12 X 18 X 0.0625 (1/16) Exact, EasyRuler Film, Shatter Resistant, Easier to Cut, Bend, Mold Than Plexiglass. VEX Robot, Hobby, DIY, Industrial. Glass Replacement

I loved the flexibility of the polycarbonate. It is not brittle and bends easily. I was using it for an art project and it was a better choice than rigid acrylic. However, it is difficult to cut to size with Exacto knife blades. It is easier if you are cutting a large piece. You can score with the blades and snap it apart with weight on one side. However, I just needed to trim less than half an inch the 18-inch length of the piece. Very difficult to score and snap. So, I would recommend a band saw to cut small pieces.

In reviews of this product quite a number of persons commented that this plastic sheet was easy to cut -- My reply: What were they using to cut it--a band saw? I tried a new #11 X-Acto blade; then a utility knife with a heavy-duty blade; then a heavy-bladed paring knife honed to a razors edge--I can cut through chicken bones with this knife with hardly any effort. I finally had to resort to heavy kitchen shears that go through plastic blister pack material like butter -- I still wound up with an uneven line that had to be sanded straight. Perhaps other reviewers were mentally comparing this to sheet metal or quarter-inch Lexan? Unless you have the strength of 2 men or access to industrial grade cutting tools, do not buy this thinking it can be cut easily using standard hobbyist tools. If you need this product regardless of relative cutability, please consider also purchasing a thin kerf saw to go with it. It is a good quality product / Most persons will not find it easy to cut -- Honest!

needed to replace slats in my bird feeder. this is perfect! easy to cut with scroll saw.

Item was exactly as described. It was square 90 degrees on all 4 corners.

Stiff like plexiglass with maybe a little more give but plenty stiff for using in picture frames. Also clear and light as plexiglass. I actually like that its thinner than plexiglass. During tabletop roleplaying games like Dungeons and Dragons, I use these sheets over the top of my paper battle maps - the clear sheet is cut to the same size as the maps, and it holds the map flat so the edges dont curl, and it protects the paper. These sheets are perfect for that use. They are cheap enough that I can get several for different sized maps.

I needed a piece of plastic, stiff, yet something I could easily cut and drill. This product met my needs 100%

We were lucky, the size is absolutely perfect for our need, the thickness is certainly going to keep our dogs from running through it (they had created their own doggy door though our screen), and unless you are looking closely it is not noticeable (almost perfectly clear). I used some quake wax to hold it against the frame, anything sticky should work as well.

Cut very easy….. scored a couple times with a razor blade and then snapped off piece. I used it as a divider for a reptile enclosure.

Happy with my purchase

Thin and easy to cut but strong enough to make small cases for my models.