Rocaris 10 Pack Flap Wheel, 120 Grit for Rotary Tools，1/8 inch Shank (32X10X3)
-
J. B. Lantz
Greater than one weekWhen mounted in my Dremel rotary tool and run at maximum rotational speed, one of these flap wheels did a good job in… | • … removing a patch of rust from a badly rusted piece of steel (photo 1). | • … removing the OD burr from an abrasive-wheel-cut piece of conduit (photos 2A and 2B). The wheel ran smoothly, and I detected no obvious rotational imbalance, neither at the beginning of my tests nor at the end. I can see that these wheels will be a handy addition to my rotary-tool assortment. At this point I find no fault with this product and therefore give it a full five-star rating.
-
GoJoe
> 3 dayI love em... I have used a lot of these over the years. These are some of the best I have used. They hold up well and also cut well. I would recommend these for your small finishing or trimminmg jobs.
Significant advantage
|
|
|
|
|---|---|---|
High QualityHigh quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency. |
Durable & SharpMade of 120 Grit high-performance alumina particles, Abrasive Flap Wheel can grind sharply.Made of wear-resistant silicon carbide substrate, the gauze is strong, elastic and durable. |
Sturdy HandleMade of alloy material with high durabulity and hardness, the rod resists corrosion and long-lasting.All the shank are 1/8 inch with 120 Grit high-performance alumina particles. |
|
|
|
|
|---|---|---|
Great polishing effectExcellent paint stripper & rust Remover,the abrasive flap wheel sander can polish and deburr effectively. Soaked in water, they can reduce dust aswell as extend service life. |
Most Commom Shank SizeThe 1/8"" shanks abrasive wheels are suitable to be used in electric drills, cordless drills, die grinders tools. |
Various ModelsThe set includes 10 pcs Abrasive Flap Wheels. Nice to be able to get into tighter corners with the controllability. |
Wide Application
Tips
1. Before use, soak the gauze in 40°-60°C water for 2~3 minutes to fully damp the gauze, increase the toughness, extend the service life by 30%, reduce proces0 Pack 30mm Sanding Flap Wheel.
sing dust, and no fragmentation.
2. Pay attention to the direction of the blades during installation, and avoid the inability to operate normally due to reverse installation. (The correct installation method: the blade is inclined from the outside to the inside, which is consistent with the rotation direction of the device)
3. Run idling for 1 minute before use, and observe whether the rotating head of the electric grinder is installed in the correct direction.
4. Please wear a mask and protective glasses before operation to prevent debris from entering your eyes, mouth and nose.
Package include 1
|
|
|
|
|
|
|---|---|---|---|---|---|
| 40 Pack 1/4" Flap Wheel Sander Set 80 Grit, 8 Sizes | 40 Pack 1/4" Abrasive Flap Wheel Sander Set,80 Grit | 9 Pack 1/4" Abrasive Flap Wheel Sander Set, 80 Grit | 40 Pack 1" x 1" x1/4"Flap Wheel (40,60,80,120 Grit) | 60 Pack Abrasive Buffing Wheels for Rotary Tools-1/8" Shank | |
| Pcs | 40 Pcs | 40 Pcs | 9 Pcs | 40 Pcs | 60 Pcs |
| Brand | Rocaris | Rocaris | Rocaris | Rocaris | Rocaris |
| Shank diameter | 1/4" | 1/4" | 1/4" | 1/4" | 1/8" |