Rocaris 10 Pack Flap Wheel, 120 Grit for Rotary Tools，1/8 inch Shank (32X10X3)

these are just what they say they are and they do exactly what they are supposed to do. what more is there to say?

These are good and worked great in my Dremel for sanding on tight corners on wood when prepping for refinishing furniture. Smooth nice finish once removing current coatings and finish

these are just what they say they are and they do exactly what they are supposed to do. what more is there to say?

Comparing one of these to some others including name brands, the quality isnt as good. Just looking at them you can see the difference, but they still can do the job. They do seem to wear a bit faster though, but the price is pretty good and if you dont mind changing them out every so often, then they are still a good value.

DESCRIPTION: This is a set of ten abrasive flap wheels, intended for use in hand-held motor tools such as a Dremel brand. The dimensions are 32mm (overall diameter) x 10mm (width of individual flaps) x 3mm (shaft diameter). --------------- POTENTIAL USAGE: I used this product as intended, in a hand-held Dremel tool. It worked as expected on wood and metal surfaces. As with any powered abrasive tool, it sheds a lot of specks of abrasive, so proper personal protection is essential for safety. I generally work under a plastic shield, but I removed the shield for the staged photo. The 1/8 (3mm) shaft also fits in a stationary drill press for constant medium-speed use. This worked well for smoothing edges of wood pieces. The shaft also fits in a portable cordless screwdriver for slow or variable-speed use, and would work well for irregular surfaces such as automotive panels, deburring pipes, or in locations without AC power. Since these tools are reversible, it is important to be sure the flap wheel is turning in the correct direction (as if you were tightening a screw). --------------- MY USAGE: I primarily use these for polishing and brightening the wheels of model train locomotives. These wheels must be kept spotless as they provide the electrical connection to the locomotive. While holding the locomotive in a cradle (see photo) I could easily address the wheel surfaces using a light touch. I had previously used a little wire brush wheel for this purpose, but that was a bit too aggressive for this use. --------------- Note the online listing for this product specifies 120 grit in the description, but 80 grit in the illustration; so not sure which is correct.

Using my rotary tool, I gave it a test on some scrap wood (see photo) and it bit right in. I was able to cut a groove in seconds. So, it seems to me to be a bit more aggressive than 120 grit. I took off a star for this apparent inconsistency. Otherwise, these are a great addition to my rotary set. Better yet, Im throwing a few in my drill bag because I see them being helpful when I do something like deck building. There always seems to be a time you need to take off a little of a bad cut or find a way to get around a proud obstruction. These should do well for that purpose. I did not try it on metal. I see no reason that it wouldnt also take off rust as advertised because these have some serious bite to them.

I love em... I have used a lot of these over the years. These are some of the best I have used. They hold up well and also cut well. I would recommend these for your small finishing or trimminmg jobs.

Nice sanding wheels for guitar making. There are many curves that are easier to manage using these. Perfect for small projects and strong.

Working on a project with live edges and needed flap type disks. Fits perfectly in my rotary tool and allowed me to sand down the live edge without losing its natural beauty. A flat sanding disk wouldn’t have been able to handle the contour surfaces without removing excessive material. Overall excellent product and great addition to my rotary tool set.

They work well so far, haven’t used them enough to know how well they will hold up but they do seem made decent, nothing to special or heavy duty . They work for what I needed them for so far. I tested them on sanding a few small pieces of wood I needed done and it worked. Will update review after use if anything changes.