Siraya Tech Blu Nylon Mecha - Tough 3D Print Resin, Scratch-Resistant, Nylon-Like Strength & Precision, High-Resolution 405nm UV Curing LCD DLP 3D Printer Compatible, 8K Capable (1kg, Nylon Mecha)

Love this on my anycubic resin printer

Smells somewhat like citrus cleaner which isnt bad, for me at least. The prints feel durable compared to a standard resin for sure. Very easy to print with, first print failed so I had to lower the exposure time and made my supports ten microns thicker. Will be my go to for functional prints and the black looks great.

I use it for mechanical parts, great strong resin, love it. Took a bit of time to tweak to my photon S printer, but after that, all the prints come out perfect. * Tip, cure it till it losses it green yellow color, and become clear blue, takes time with my DIY curing station, and a bit tricky with thick parts. Direct bright sun does much greater job. Update: tried the clear version, it seems to be softer, with longer cure times, the blue color really helped with knowing curing times, with the clear its a bit more tricky. If you are not aiming for a clear print, go with the blue version.

Product is OK, I made some knobs for my simpit panels (F18 project) that I needed to be translucid so that I could paint them partially and get light going thru some unpainted areas to get some markings on the knobs illuminated from below. Other than having a mild yellowish tint to it, it is translucid enough and result is good in term of toughness (it gets really hard), minimal shrinkage, smoothness and fine details. The adhesion to the printing bed was super strong so I had some difficulty removing the models but at least adhesion is not a problem. However be ready, this stuff is thick, sticky and hard to wash, even using 99% IPA, and stinks quite bad. I have a room dedicated to my project, I closed the door and open the windows as usual however forgot to turn off the central A/C and some air recirculated in the house and that bad smell went everywhere. Bottom line, sticky and hard to wash off the models and equipment (requires a long alcohol wash) and better have a well ventilated isolated room for using it.

I like the color and the rigidity of this resin, but it just never seems to cure. I left a piece in light box for 30 mins and its still came out tacky. Its probally something im doing wrong in the cleaning process though. I cant be sure.

Excellent stability and durability. Great for prototypes, especially if mixed with tenaciuous.

This resin is like no other. Very very strong, accurate and beautiful. Make sure your printer is around 30C though.

Muy buena resina, funciono tal cual las especificaciones.

Incredible durability. This is almost like a rubbery resin. Small parts of my models are still flexible even after curing. I had a problem with supports not printing correctly and pretty strong shrinkage. I think this has to do with the high viscosity and flexible nature of the resin.

Why it does not give me the opportunity to invite my address to the blu? He lets me order only the clear..