Siraya Tech Blu Nylon Mecha - Tough 3D Print Resin, Scratch-Resistant, Nylon-Like Strength & Precision, High-Resolution 405nm UV Curing LCD DLP 3D Printer Compatible, 8K Capable (1kg, Nylon Mecha)

good

thank you

this product is one of my favorite resins and honestly gives me some of tge best prints ive ever had

Speed is good. 30% increase in cost is worth it for functional parts.

So I have been producing on a professional sales level for over a year and I have the right equipment and heaters and such. Let me tell you, even when heating to 30 degrees Celsius this stuff is very hard to deal with. The supports are near impossible to remove and it fails easily if I dont cover it in supports. Also make sure you keep the heat running while you try to drain it off. Also it doesnt want to come off with denatured alcohol twice, let alone once. Its just very viscous and demanding and not worth it. You get a similar and easier product to use in Elegoo ABS-like translucent resin.

Great product, but make sure you have proper ventilation for this resin. The fumes are super strong with this one. Also, I spent quite a bit of time figuring a way to manage/regulate the resin temp because this stuff heats up quick and layer separation happens easily. This stuff is too expensive to run experiments with, so start small.

Very tough, super hard almost unbreakable for the most part. But, that is, when set up correctly. I use heat, a small heater or better, the magic formula is a hot tub of water. Before you pour your vat, heat up a small tub of water for about 2 mins. Then set your mixing cup in the water after you pour about a 75/25 mix of another resin to this resin. Let it warm for about 3 mins. Stirring while heating , you’ll see the resin begin to thin down and get really fluid. Then proceed to pour and print. I use the same settings as my Phrozen water wash profiles. Works perfectly. Thank me later.

Love how clear this prints.

Im using Siraya Tech resins for a long time now and have had a great time using them. I especially love how tough their resins are while being able to handle super high-res details, if you want your prints to not break like crackers and have great details, I highly recommend Siraya Tech resins. Fumes are very minute and the smell is pleasant so you can easily use these in smaller spaces. I have an ambient temp of above 28° so didnt have any problem with high viscosity either.

By far my favorite resin to use. The durability makes it perfect for prop and costume fabrication.