Uniden BCD996P2 Digital Mobile TrunkTracker V Scanner, 25,000 Dynamically Allocated Channels, Close Call RF Capture Technology, 4-Line Alpha display, Base/Mobile Design, Phase 2, Location-Based Scanning

Thi is a great scanner using to listed to Motorola Type 2 P25 systems. It takes some figuring out to program, but you can use FreeSCAN software and a standard USB cable to program.

This aint your dads scanner where all you had were banks and channels. It has a pretty steep learning curve but I knew that going into it. Watch the videos on line and download a program to aid you in setting it up. There are free ones out there that work fine. Before you buy this, make sure that what you want to listen to isnt encrypted. This will not hear those encrypted frequencies (no scanner will legally).

This is a very difficult scanner to program by hand (especially trunking) (TGIDS) without using a computer and you MUST use FreeScan software, but once it is set up, WOW! It is made very well with all metal casing and great sensitivity and audio. Just go onto YouTube and watch the videos showing how to use it and its features and benefits. Ill probably buy a Uniden external speaker even though it is being used as a base scanner as the only downfall is the speaker is underneath it. You can change the display colors, make it a red color for your most important frequency and MUCH more so read up on it prior to purchasing. Also, you can adjust the Digital P25 Threshold/P25 LP Filter in the menu settings. The Chicago Tribute had an article on this stating that the Bearcat BCD996P2 is the BEST scanner Uniden America Corporation has EVER manufactured! If anyone needs any help setting this up, or buying advise, please feel free to contact me here.

This scanner is great. Its easy to program once you figure out, without any help from the manufacturer, that you need to use a windows 7 computer and not windows 10 to program it if you want to use pc software to do it. You can program this scanner from the unit itself if you really want to. Its one of the easier scanners Ive programmed for conventional anyways. I havent had a chance to try out the trunking of p25 capabilities yet as my area is building out their p25 p2 network at the moment.

This is a great desk top scanner. It does have a learning curve, which means you can expect to do some learning! My experience with software called FreeSCAN and RadioReference.com made set-up SO much easier. A 1-yr subscription to RadioReference is $60 at this time, well worth it as it does make set-up using FreeSCAN much easier! All in all, No Regrets, as the scanner price on Amazon is VERY good. Im in a low spot, still reception has not been an issue. The sound quality is good, but there is always room for improvement. Otherwise, no complaints. It is complex, yet doable with some patience and flexibility.

Great Scanner! Definitely watch YouTube videos to see how to program it, the instructions are confusing. The sound is a little muffled, but that could be the officers.

This scanner is capable of receiving the majority of everything (not encrypted) in the Police/Fire/Public Service/Military Air/Gov/Misc bands in either analog or digital modes. It receives APCO P-25 digital (both Phase I & II) signals great for me with a stock antenna but I am in a good location to receive two actual P-25 trunk radio system site towers with good signal levels. With digital 800 Mhz signals though, you may need less antenna. About 6.5 inches in length is a good 800 Mhz antenna. With an attic mount ST-2 antenna on a tv antenna booster, I can receive analog signals 60 plus miles away cleanly but thats flat terrain to the top of the Willis Tower. If you have marginal (P-25) 800 Mhz signal levels you wont get many signal bars lit up, it wont trunk track right and you may see talkgroups show up on the display but no audio is heard/garbled/breaks up because it cant decode the digital modulation, or it just might be encrypted. When you get trunking lock on a control channel in APCO P-25 mode, the actual frequency will show up (small) on the display, otherwise you just get NFM on the display which means youre not tracking the system and it will not work. But once you get lock on a control channel, if it all works correctly, it grabs talkgroups at will and you will have to label them or sort out what you wish to really listen to as there will be plenty of (channels=talkgroups) at busy times. With digital trunking systems, it depends on the tower near you having the talkgroup channels you want to hear available on that tower. As far as digital trunking signals go with any digital scanner, all bets are off. The signals fade out at times, some of these RF tower signals get more/less power alloted to them on each tower. In order to fully monitor one P-25 system, the scanner may have to listen to 6 or more towers (in one system) that are all directions from you with varying RF power levels on each frequency, in order to properly receive ALL of your chosen channel (talkgroups) in that Police system you want to hear. If this seems too complicated, well it is. There is a Computer Control channel on P25 digital trunking systems that tells the police system computer what frequency to use or hop to (each split second) and you may get that individual frequencys (talkgroup) good/bad/gone off various towers (and all at nearly the same time yet!) This is called simulcasting distortion and makes listening to any APCO P-25 digital Police trunking radio system extremely hard for any new digital scanner. And the nasty winds, rain, leaf foliage too all mess havoc with these signals. No getting around this. You may be in a good/bad location, it all depends. You may have missed details in your programming, yes I did too many times. Could be your location, your antenna, your programming, proximity to too many other site towers, winds, (high winds or hot/humid air seem nasty on narrow P-25 signals), or the big TV/Radio/Cell Towers nearby with mega kw watts etc. It is a huge complicated mess even for an expert radio engineer to deal with. A lot of it is...trial and error with P-25 digital. Does it track control signal? No. Move antenna/radio a few inches, try again. But the BCD996P2 (once setup right) excels at receiving everything great! This scanner works Great for me in my location even on the factory antenna. And the bandscope mode is fabulous too. I love it. It is up to you to sort out the critical-channel-programming first before you use it. Study the Radio Reference website, it might take time. I would advise to use a computer to program this scanner, otherwise youll just pull your hair out. You cant program this scanner by using zip codes like some others. Freescan (sixspotsoftware) is a great Free program to use, I use it, others exist too. You can plug the scanner into your PC via the included USB cable. My Win 7 PCs found it right away (You setup Control Scanner, Set com port to auto find in Freescan and it should find your scanner on a com port. Then you upload your channels/lineups to the scanner) But first you need to find the frequencies in the Radio Reference website. Freescan also has a Cut N Paste frequency import method which works fine as you select from database info. An outside scanner antenna used with at least an RG-6 cable is optimal for the best reception with this extended coverage scanner to hear everything. I also use a cheap (75 ohm) TV antenna signal booster with 18 db gain, on 50ft RG-6 and a 4 port ant splitter. I have a lot of RF signal levels (using bandscope mode) but no overload that I can see or hear. But for local signals (20 miles or less) you probably will do just as well with the back of set stock antenna, for both analog channels and digital systems. For 800 Mhz specific signals, use a 800 Mhz antenna like a Remtronix. The scanner can be used in the car, it comes with 2 DC power cords, one with a lighter plug, it has a nice bracket and includes the AC adapter. This unit is the base model of the portable BCD325P2 hand held scanner. They are the same to operate/use and program. This 996P2 model has a bottom fire speaker with a deep bass audio sound on digital systems and it sounds like a loudness circuit in a stereo, compared to my RS-652 desktop scanner which has a tinnier sound. You can choose one of 7 colors for the display and it has many signal adjustments for each channel/system, which is why you need patience. You can upgrade this scanner now to receive ProVoice, Mototrbo and DMR but Uniden charges an extra fee for each one. I do not have these upgrades and may not get. These new digital scanners are frustration devices to many people. For the expert, yes, this scanner is marvelous, you can hear everything except Encrypted signals. Be sure you have days/weeks of time and patience to spend with this thing first though. The learning curve is very steep. It is not plug it in, put in a few channels and listen like in the old days. Every channel has about a dozen parameters to setup first, a P-25 digital system may have 2 dozen parameters to setup first, then one dozen items per channel on top of this. This scanner does Not use an SD memory card to store channels/data to. These can be problematic and cause odd errors of all kinds. But the BCD996P2 scanner is a techs dream to use (once programmed properly) and a upgraded cousin to my all time favorite pal the Uniden BCD396XT portable scanner. But this scanner is still quite a challenge for anyone to setup/operate/use. Five stars because it is simply a phenomenal scanner (with exceptional abilities) targeted to mostly expert scanner junkies.

No complaints..works great. I do advise you use the cable to the computer and to use radio reference along with FreeSCAN to get it programmed. It took 15minutes for me to do that and I was all set. The instructions are horrible for anyone not good with electronics or computers. Only thing I wish it had were more single button pressing options - I dont need the WX button not sure why anyone would with all the apps and a quick site you can pull up on the computer - would rather like to have a quick FM button for radio usage or a quick CB radio button. Id like to have a quick disconnect method on the mount for the vehicle so I could move it from there to the house with ease so maybe they will look at that in the future since its just too expensive to get two of them at this time for both locations.

As expected

I bought a 2nd one. this is a p25 digital analog rig. compatible with the new Oregon Radio Project p25 700mhz system in my home state.