WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JEREMY
> 3 dayHelped to extend wi-fi range to my upstairs rooms with wireless router downstairs. Set up was a little confusing but got it set up in about 30 minutes. Happy so far.
-
ALBERT
> 3 dayDoes exactly what is should, and easy to setup. I couldnt stream Netflix in one bedroom farthest from the router....problem solved. Great price and works just fine for 2.4ghz signal.
-
CHRISTINE
> 3 daySetup was not as intuitive as it should have been, but this is a great value and does the job. If you are comfortable with less than plug and play setup this is a bargain
-
BENJAMIN
Greater than one weekI used these to extend the range of my Cisco E2000. Installation was so easy I thought that I hadnt completed everything.Plugged in the device, Booted my router and was working in about 3 minutes.Got excellent extra coverage.An excellent device at a good price
-
CHRISTINE
> 3 daythis product works quite well. No hassle connecting it to the source. signal is quite stable. the price is little bit high, but worth it.
-
Dr. Gerd Loewenthal
> 3 dayschnelle Lieferung; gute Verarbeitung, tut was es soll
-
PeerJ
05-06-2025Für den Preis absolut Top was will man mehr,
-
MARGARET
> 3 dayI have a router that enables you to create multiple networks. I set up one network with a weak password and basic encryption, for visiting Guests. I used it to extend the range of my family_network. During setup, I used an option to name the extended network with a different name, family_network_extended, so that I could easily measure or connect to either network, without confusion.This product does what it promises; it substantially boosts signal strength.
-
MARY
> 3 dayThis item was plug and play right out of the box and extended my wireless network into my garage so that my new wireless sprinkler controller worked better.
-
Dean K.
Greater than one weekEs ist unfassbar das ich ein Defektes kabel bekommen hab und es vornherein nicht funktionierte! Diesen Verkäufer empfehle ich niemanden!
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
