WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port

(593 Reviews)

Price
$41.99

Quantity
(10000 available )

Total Price
Share
2834 Ratings
2703
65
20
8
38
Reviews
  • MARGARET

    > 3 day

    My dual-band router had always been able to reach through all 3 floors of my house, but I recently bought some WiFi enabled outlets and they seem to have found some deadzones in my house. This has excellent range - I can connect to my car parked across the street, about 50ft away through a wall. It was easy to set up and does what it needs to.Ive been using this product for about 3 months.

  • Kathrin Schiffner

    > 3 day

    Super würde ich immer wieder kaufen

  • PATRICIA

    > 3 day

    Good probuct has the ethernet pirt that i use with an ethernet splitter to system link xboxesThis is a very good product. I was really surprise at how great it worked.

  • MS

    Greater than one week

    Das Kabel ist sehr dünn, Nach der Verlegung läuft es nur mit 100 Mbit/s statt 1 Gbit/s. Das einzig Gute ist der Schutz, dass die Lasche am Stecker nicht abreißt.

  • ALBERT

    > 3 day

    Great to add WiFi via ethernet on a Single Board Computer. Good connectivity and signal strength.

  • Sing Blackbird

    > 3 day

    Does its job. Good value for money

  • Dirk S.

    Greater than one week

    Gibt nicht viel zu sagen, dass Kabel ist gut aufgebaut, macht was es soll und hat ein gutes Preis-Leistungsverhältniss, sehr zu empfehlen.

  • P. Meyer

    > 3 day

    Der Artikel kam sehr schnell nach der Bestellung an und überzeugt durch seine perfekte Verarbeitung etc.

  • juhuhn

    > 3 day

    Its easy to install, configuration has some interesting options, though more advanced options could be added, but in general the basic things you need to configure are there.

  • CHRISTINE

    Greater than one week

    Work well and simple to set up. It took me less than five minutes to open the box, read the quick set up guide and have it running.

WT1C15WT1C15
WTAC15WTAC15
WTAC15WTAC15

WTAC15WTAC15

WTAC15WTAC15

WTAC15WTAC15

4*3 dBi External Antennas

180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed

Smart Signal Indicators

Signal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED.

With Vent Hole & WAN / LAN Port

Air vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one.

WTAC15WTAC15

WTAC15WTAC15

WTAC15WTAC15

Repeater Mode - Wireless to Wireless

Amplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use)

Repeater Mode - Wireless to Wired

Convert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring.

Access Point Mode- Wired to Wireless

Use Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms.

AC15 WIFI EXTENDER AC15 WIFI EXTENDER

Reminder:

  1. The working status of the repeater can refer to its smart indicator light.
  2. WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
  3. When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
  4. When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.

Related products

Shop
5G Research Institute
5G Research Institute
( 2377 Reviews )
Visit Store
Top Selling Products