WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
JOYCE
> 3 dayTook all of 5 minutes, and Im finally able to get online in the basement. Not sure if it can handle online gaming [I havent tried], but its plenty competent for browsing and streaming videos.
-
ALBERT
> 3 dayWorks great, Had very poor internet in the front of the house,Less than 5 minutes up and running, plug it in, turn on your l Pad or etc go to settings and follow instructions.
-
Kevin Schönecker
> 3 dayIch finde es super hab ein neues gebraucht und
-
JERRY
17-04-2025I bought this product without ever having knowledge of a Wi-Fi extender or much knowledge about networking and wireless in general.Took care of the dead spots in two rooms. I can once again enjoy my Amazon Fire stick programming. Took about 15 minutes to install. I highly recommend this product! It was extremely pretty easy to set up and has worked wonderfully thus far. Great price for the product. I highly highly recommend it.
-
MARY
Greater than one weekFixed the WiFi dead spot in my house. I get a strong signal everywhere now. Really easy to set up. I tried it from a couple of spots before I found the sweet spot. Highly recommended.
-
MARGARET
> 3 dayI bought this product without ever having knowledge of a Wi-Fi extender or much knowledge about networking and wireless in general.Took care of the dead spots in two rooms. I can once again enjoy my Amazon Fire stick programming. Took about 15 minutes to install. I highly recommend this product! It was extremely pretty easy to set up and has worked wonderfully thus far. Great price for the product. I highly highly recommend it.
-
Simone Fleischmann
> 3 day- hat alles gut funktioniert
-
MARGARET
> 3 daySo far so good. It took a couple of minutes to get this setup with our Verizon Fios router, but once it did it has stayed connected. I think the one thing everyone needs to remember, is that WIFI will always be slower than hard wired and there are many factors that will determine the signal strength.
-
JOYCE
> 3 dayWorks great, easy set up and has increased wifi signal from upstairs loft to downstairs family which are opposite sides of the house.
-
`*~*~_alex_~*~*´
> 3 dayEinfaches aber gutes und preiswertes Lankabel.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
