1/4 Inch 6x12 Aluminum Sheet 6061-T6 Aluminum Tooling Flat Sheet Plate Bar Mill Stock

I used it to fabricate mounts for my eTrikes battery and controller. Perfect for my needs.

I ordered 1/4 Inch 6x12 Aluminum Sheet 6061-T6 Aluminum Tooling Flat Sheet Plate Bar Mill Stock KAYLAN. Everything I hoped for. Good quality. Flat. Well machined. Even came with a protective skin.

Drilled a bunch of holes and used these as extension plates for a camper, to be able to squeeze the truck in better. They are strong and the dimensions were accurate. No burrs. A better price would have meant I purchased more. Still a little on the high side, but after searching Lowes/Home depot with no luck, made sense to go this route.

Few light very shallow scratches but still perfect for my needs.

The product was great. I asked for a refund only because I ordered the wrong width.

I used these plates to mount rod holders on my boat. They are the perfect size.

I wanted to replace and relocate the horn on my Harley FXR from under the battery box to the front of the frame but couldnt find a decent looking bracket that would work on my Road Runner Beep Beep Horn. While this was far more aluminum than I needed, the price was right and I ordered it in. The aluminum thickness and overall size was as expected and was covered on both sides with plastic. It was easy to work with and after some time with a hacksaw, files, spindle sander and drill; I was able to make a functional and decent looking horn bracket. Finishing this aluminum was easy as well. What you see in the pictures is a quick sanding with 320, followed by 600 and a quick hand rub with Mothers. I was able to make my bracket and have enough left over for other projects. Win/win.

This product is simple but was exactly what I was looking for. I have already used it several times for work.

Used as weather proofing base for outside electrical box mounting for floodlights under my eave trough

The Sheets were Well packaged The down side was the metal edges were rough cut and very sharp. A very slight buffering of the edges would be appreciated