4 Pack 12x1.5x0.12 1095 Steel Flat Stock with Strict Quality Standards, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making - by TITGGI…
-
James Townsend
> 24 hourDefinitely the most professionally packaged steel I have ever received. I look forward to working with it. So far, very impressed.
-
Casey T.
> 24 hourExcellent quality. Extremely straight. Extremely fast shipping
-
brad1972
> 24 hourOrdered these blanks to show my son how to make his own knife. He got his pattern scribed and showed me and I noticed the bow in the steel. So far only 1 out of the 4 is bowed. Would recommend Jantz Supplies. Always had good quality from them.
-
Elisabeth Price
> 24 hourReally nice clean steel. Each piece is wrapped individually and nicely packed together to protect during shipping. Very clean which produced very nice blades.
-
Texas Turner
> 24 hourI was looking for several sources of new 1095 carbon steel. Instead of acquiring recycled billets I tried these. We cut patterns, shaped, and forged to hardness. Made very good blades and other items. I even bought a second set and would encourage others to try these as well.
-
Laura Avery
> 24 hourIm sure this is fine steel but, as others have said, its NOT annealed. If you send your blades out to be heat treated, and dont have the means to get this hot enough to anneal it, you will have problems. EDIT: The seller contacted me and offered a full refund, was very nice. I had already sent the steel back, but they were quick to reach out after my review, so I wanted to let everyone know. If you can anneal this, it was straight, clean steel.
-
Mr. Merle Ledner Jr.
> 24 hourSome sections of this steel I was easily able to cut with my band saw. Other areas, the blade wouldnt even scratch it. Even with a new blade. If youre making knives with it, you should already be equipped to get the steel into a soft state.
-
builditall
> 24 hourHarder to cut that most but its worth it once you build something out of it.
-
Craig west
> 24 hourAs advertised
-
Abby Duty
> 24 hourToo hard.
TITGGI is committed to providing customers with excellent products and the best service. If you are not satisfied with the product, we will provide you with a satisfactory solution.
Why Choose 1095?
The 1095 steel flat stock is the most common and one of the most widely used high carbon steel on the market. For knives, 1095 Steel is a very "standard" steel with good performance and low cost, with appropriate toughness and sharpness, better in every way than 1084 steel for knife making. 1095 steel flat stock is an awesome knife making supplies.
Anti-rust Packaging:
- We apply anti-rust oil on the steel plate to prevent the 1095 steel flat stock plate from rusting.
- We use anti-rust paper to seal the 1095 steel bar stock plate to isolate the knife steel plate from contacting with outside air or water.
- Finally, we put the knife making steel plate into the bubble bag to isolate the air and water again, and prevent the sharp four corners from damaging other products delivered together.
Maintenance Points:
- Remember to wash it, wipe it clean, and dry it after your knife steel contacts with water, blood and other liquids or in a humid environment, make sure its dry and there is no moisture on the blade.
- Remember to apply knife oil when the knife is not used for a long time.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 3 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 4 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 5 Pack 1095 Steel Flat Stock | 8 Pack 1095 Steel Flat Stock | |
| Available on Amazon | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Quantity | 3 | 4 | 4 | 5 | 5 | 8 |
| Length | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches | 12 Inches |
| Width | 1.5 Inches | 1.5 Inches | 1.5 Inches | 1.5 Inches | 2 Inches | 1.5 Inches |
| Thickness | 0.16 Inches | 0.16 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches | 0.12 Inches |