8 Pack Strip Disc Stripping Wheel - for Angle Grinders Remove Rust Paint Stripping Wheel Clean Coating Welds Rust Oxidation (4 x 5/8)

These work really well for stripping paint. I had a garage door I was trying to refinish and it had years of paint in it. The levels of paint and drips made it so I was tempted to use a plainer to get all the coats off but decided to try these. These brushes made the job so much easier and faster. I like that I am able to angle them however I need to get a detailed and clean job. I really appreciate these and the way that they make taking paint off a breeze.

Took a while to receive but I think it was an issue with USPS. When they arrived, we tried them out. They are really strong and rugged. Works great!

So far I think this disk works well. They do not last as much as other overprice disks. But they do the job.

Impressive. The grinding material seems to be glued or fused to the arbor plate. I need this type of glue for everything! With that said - the grinding material sticks well to the plate it is attached to which of course is important. And what is this grinding material? Description states high-strength wear-resistant fiber mesh and combines resin elastomer and high-quality black diamond. It certainly does the job and does it well. All you need is a light touch to start. Work smarter - not harder. The grinding material seems to be flexible yet sturdy. Takes some finesse to get it done right. I easily removed the rust from entire metal leg I show in the picture and the grinding disc showed minimal loss of material. These should last for quite a while. I used the blue for removing the rust because I believe the purple discs are for heavier jobs. This was magically answered in the question section - not the description. I had to tighten the grinding disc to my angle grinder by hand. My tightening tool does not reach into the depths of the disc because of the thickness of the grinding material. I wore gloves and turned the wheel with the grinders lock on until it wouldnt turn anymore. I am confident it is secure but will keep an eye on it. Reverse this procedure to remove the disc. It is a perfect fit for my tool. No material other than rust went flying. I thought the material might grind off but it was not noticeable at least. Eventually I am sure they wear down. It looks like they might even clog up but that will depend on the material you are grinding/polishing. Of course, always use eye protection and unplug your tool when changing wheels. I consider myself very aware of possible hazards but lost the tip of one finger years ago to a silly mistake. Luckily, I have nine more fingers that still work fairly well. Always be safe. The product appears sturdy and well built. Very well built. These will make some hard jobs easy. A must have for the toolbox. They are a great value for an eight-pack. Neat product.

Im currently working on a 1936 Chevrolet. The car is a older restoration that Im stripping the paint on. Im also redoing the interior and taking the sound deadening material off the inside. Not only do these strip paint great, they also make easy work stripping the sticky residue left behind from the sound deadening material. It last fairly well with light pressure on the paint. The residue from the sound deadening material does eat them away a little quicker. Fortunately the price of these are great compared to anyone local. I can purchase this 8 pack cheaper than two locally and they last the same. Definitely cant beat price, quality, and quantity. Less money I can spend on consumables, the more I can put into the project. When working on project vehicles, you never hear people talk about the price of consumables during the build process. Between sandpaper, sanding disc, cutoff wheels, welding supplies, welding gas, etc, you could easily have another grand tied up in the project. Its definitely nice to save some cash whenever you can.

Was welding up some brackets using steel I had laying around in the garage. It had obviously oxidized much over the years so I needed to clean it up. These stripping wheels made quick work of cleaning the surfaces so I could weld them up.

These do work for stripping/grinding paint pretty rapidly, but they are not an exact fit for a typical angle grinder. They do not fit on the shoulder of flange like most other discs do. Instead it merely slips over the shaft with a loose fit, hard to center, which makes them spin slightly off-center, which is sort of dangerous. Surprisingly it didnt equate to much extra vibration on the tool during use. In my photos you can see the product, and in my last photo, Ive compared it to how discs are supposed to fit. I did brave using these despite not being able to get it perfectly centered, and they did perform the job of removing paint from wood very fast. Although they did remove paint quickly, I had to ding the rating a little because of safety aspect of not being able to center these perfectly. My summarized assessment of this product is that these will do the job, but there are certainly safer products available.

These attached to my angle grinder very easily. I don’t work with a lot of metal but I do need to strip paint off wood. They work well at doing that. Even though they feel very rough the pads have some give to them so they don’t tear you wood apart. They do remove paint very quickly. I imagine they will work just as well removing rust off metal. I think these are a great price and work well and will be a good purchase for anyone needing to remove rust or paint.

If you have an angle grinder and need to strip paint or wood, these are what you need. Aggressive and work amazingly well when used on a metal trailer to remove old paint.

I needed to completely redo a square metal pipe that had a significant amount of rust on it. So, I got these to try to clean as much rust off as I could before treating the metal and painting it. Since I was waiting for these before working on the project, I grabbed them immediately when they arrived and could not wait to see how well they worked. I was surprised at how quickly and easily it removed the rust and cleaned it up to bare metal. It made the job of priming it and painting it very easy. These were amazing for my needs.