























ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey
-
william miner
> 3 dayNew to the hobby and this has almost no smell, isnt horrible on my skin (I wear gloves but accidents happen), and the overall quality of my prints is very good. Using an Anycubic Photon Zero so not the best out there as far as resolution but I still get quality detail with this resin .
-
Dawn J. Jones
> 3 dayOutstanding, low odor resin. Like all plant based resin, it is a bit brittle so plan accordingly.
-
Christian Carmona
> 3 dayEstá resina es fácil de lavar, casi no huele, configuración simple y rápida para la impresión.
-
Joseph
> 3 dayResin leaves a film on bottom of VAT everytime. Near impossible to clean it without damaging FEP sheet. Only benefit is that it doesnt smell but the disadvantages GREATLY outweigh the positives when trying to clean it.
-
Kathy
> 3 dayGood resin and packaged well!
-
Carina
> 3 dayI just got the anycubic photon mono 4k printer and used this resin for my very first print! I’m super happy with how it turned out! I have never used regular resin for 3d printing before, so I can’t say what the difference to non plant based resin is, but I’ve used uv resin in small amounts for crafting before. This resin definitely smells less. During the printing I did not notice much of a smell (I did make sure to have the room properly ventilated). The only time I did notice the a quite strong smell was when I cleaned up the container I used for washing the mini (I had taken the respirator off at that point). I am impressed that the translucent green has held up well. I’ve seen some videos where people got a kinda hazy cast to it, but my print looks nice and clear. I also got the grey color resin and have something in the printer using that right now. I will definitely use his brand again once I run out (which will be a while!).
-
Mark Byrd
> 3 dayHappy is my first lithophane using Halot One SLA printer. Printed on a thin edge. Stayed fixed to the build plate (10+ hours) and separated from the plate easily when print was finished. Post print curing did not amber or pink. 3rd Anycubic SLA resin I have purchased because the first two (Clear, Black) were very satisfactory.
-
Stephen S. Showalter
Greater than one weekPrinted a bunch of Gelatinous Cubes and they came out great. Only thing I had issues with is it cured under the led lights I have for the resin printer. None of the other resin Ive used has done that.
-
Alán Pérez
Greater than one weekGreat quality!...
-
Micheal Weddington
> 3 dayI print minis.