ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey

Resin won’t completely form and will usually fail to adhere at a couple points in almost every print, been playing around with settings. Overall a decent resin. Used up almost 1000ml just to get a decent quality print out of it.

Works wonderfully with factory settings on my flashforge Foto 8.9

I am very dissapointed with this product i worked with anycubic grey and black before and plant based resin and never had this kind of issue. I rarely failed a print and with this bottle i clearly wasted my entire bottle doing exposure trial and errors. Even bumping the exposure time to 16 which makes a print take x4 longer to get a mediocre result is dissapointing. I would also like to mention that the low odor is not accurate at all. This resin smells 3x stronger and worse then the original product. I will go back to grey resin no interested to encourage this product anymore. Eco friendly at what cost ...

Having no printed with both of the Eco resin, and the standard resin, I can confidently say that the Eco resin is better for one reason, which is that it doesnt cure to the fep. The closest thing that I have experienced to this with the Eco resin is that on the areas where a part was printing out of, there will be a sort of area of resin that sticks to the fep that is thicker than the rest of the resin, but still definitely a liquid. With the standard resin though, I have had two separate prints now where the part printed normally, but while Im cleaning out the fep, I see that there are areas of hardened resin that are stuck to the fep that I have to remove with the plastic scraper that came with my printer. As Im sure anyone whos done 3D printing is aware, every time that you have to scrape something off of the fep, there is a risk that you are going to damage it and create an indentation which can affect print quality. This has happened to me. While using the Eco resin, I have never had to use the scraper, to remove the thick resin stuck to it, all I have to do is put some IPA in it, let it sit for a minute, and then soak it up with a paper towel and then wipe it clean with a clean room cloth. They both produce pretty much identical print results, and the Eco resin does have less of an odor. Ive also noticed that it cleans off a little bit easier with ipa, the regular resin gets kind of grainy and sticks to stuff in patches, whereas the Eco resin dissolves consistently and completely into it.

Looks great and easy to dial in your exposure.

I just got the anycubic photon mono 4k printer and used this resin for my very first print! I’m super happy with how it turned out! I have never used regular resin for 3d printing before, so I can’t say what the difference to non plant based resin is, but I’ve used uv resin in small amounts for crafting before. This resin definitely smells less. During the printing I did not notice much of a smell (I did make sure to have the room properly ventilated). The only time I did notice the a quite strong smell was when I cleaned up the container I used for washing the mini (I had taken the respirator off at that point). I am impressed that the translucent green has held up well. I’ve seen some videos where people got a kinda hazy cast to it, but my print looks nice and clear. I also got the grey color resin and have something in the printer using that right now. I will definitely use his brand again once I run out (which will be a while!).

This resin will give you great detail with reduced odor (it still smells pretty bad) the biggest problem is how brittle it is. If you’re looking for resin that can withstand normal wear and tear, drilling or even an accidental drop to the floor I’d look elsewhere.

I am a goldsmith with an xtra trick I cast with this product no chrinkinge and print very good have a mono se printer and a photon s thank you

If you purchase this resin, make sure you have a very good ventilation system in place or lots of windows you can open. My Mono X and Mono SE are in a self-contained heated compartment complete with ventilation and dedicated air purifying system. And yet the smell permeated the house and made further printing impossible. It also brought on an amazing headache that went away once the vat was emptied, cleaned up and the used resin poured into a sealed container. Though the print quality is very good, I will not be using it anymore.

I used a enter bottle and not one print was successful.