























ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey
-
Steven Saryeka
> 3 dayI had issues with stinky Resin and this one not only was scentless even during printing, but the quality of the print remains as well. Very satisfied and will be printing with this as a mainstay, next to the Shatter resistant resin from Anycubic.
-
Les K’
> 3 dayIf you purchase this resin, make sure you have a very good ventilation system in place or lots of windows you can open. My Mono X and Mono SE are in a self-contained heated compartment complete with ventilation and dedicated air purifying system. And yet the smell permeated the house and made further printing impossible. It also brought on an amazing headache that went away once the vat was emptied, cleaned up and the used resin poured into a sealed container. Though the print quality is very good, I will not be using it anymore.
-
Pamela L.
> 3 dayWe ar so happy with this Organic Resin. It dries clear and is fluorescent under a black light.
-
Steven J. Howland
> 3 dayI recently bought this resin and printed it on my Anycubic Photon and my Phrozen Sonic Mini 4k, this resin is very easy to use and I recommend it to newcomers. On the Sonic mini 4k I printed the daemonette models I have uploaded pictures of. This resin captured all the detail on the models and has a bit of flex to it so the models arent brittle. I printed them at .05 layer height and 2.7s per layer, I feel like this is a great starting point if you are on a mono printer. The space marine models were printed on my old photon and they came out well, I think they were printed with 13s layers. This resin has a low odor when it is printing so if you cannot vent the printer or filter it the resin will not stink up your room. Please remember to wear gloves when handling it and to wash the resin in high % isopropyl alcohol when cleaning the models.
-
Kapt_Tatturflagg
Greater than one weekSo it works, but when you cure it after printing it will turn peach colored. I assumed it would, but figured I would tell any curious people out there.
-
jgutz20
> 3 dayi got my best results on my Photon Mono X Printer using 1.3 -1.5 second exposure times at 75% UV and 16 second base layers. I will buy again when sales start popping up
-
Judy
> 3 dayRecommended.
-
Austin Weigle
Greater than one weekIve been 3d printing for years, and since I started using this stuff, Ive had almost no print fails and they come out looking fantastic. No more bad looking dnd minis for me
-
Matthew S.
> 3 dayThe fumes are 95% less than standard anycubic resin. Even w/ a 2s exposure time it still produces great results. Ill be sticking to this resin probably on a permanent basis.
-
Patty A.
> 3 dayI tried printing with this resin multiple times and every time the print wouldnt cure even when left in my curing chamber for several hours. It was left tacky. I cleaned it with my ultrasonic cleaner and I also tried cleaning it by hand as well but same result. I also had many failed prints. I changed the exposure time to 10s as the bottle came with a note recommending to increase the exposure for longer prints, but that just resulted in another failure. Emailed anycubic and got an indecipherable response. Waste of money and my relatively new fep sheet now has damage.