ANYCUBIC 3D Printer Resin, 405nm UV Plant-Based Rapid Resin, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey

I love this resin, it prints great, it has VERY little smell. But you have to check your bottles. Sadly one of my bottles came full, the other bottle had quite a bit missing from it! Will update after i hear back from seller! UPDATE: This seller never got back to me about this problem. I wont be buying from them again if they refuse to get back to me about this issue. Dropping review to 1 star

making designs with this resin is easy and when stated low oder it means it as it has almost no smell compared to the regular resin.

Had many problems with this resin. It would develop a skin / cure sitting in the vat overnight with a finished print. This was not due to light exposure as it was in a dark room. Had a lot of related issues as a result, never did get any kind of quality print out of it as a result. Long prints would end up pulling up the skin on the top and distorting. Just for fun I left a little out in a bottlecap overnight and sure enough, it cured up pretty much solid by morning.

Resin won’t completely form and will usually fail to adhere at a couple points in almost every print, been playing around with settings. Overall a decent resin. Used up almost 1000ml just to get a decent quality print out of it.

I was about to get kicked out of the house due to the smell of typical 3D printing resin. This one is not odorless, but the smell is only a small fraction of the other resins. It also isnt quite so sticky when you get some on a tool handle or your hands (yes, I wear gloves, but Im not perfect). For the Mars 2 Pro printer I did some tests and found that 3.5 second exposures (45 seconds for the first layers) worked well. Your preferences may vary depending on what you make, but that would be a good starting point. For other printers the numbers could be very different, because each has different UV intensity. I have been printing airfoil cross sections, 113 mm chord by 145 mm wide. The pieces are hollow, with a wall thin enough that it flexes in your fingers. You can seem some flaws in the photo, but most or all are because the FEP film in the machine has damage from previous projects. Once I replace that, results should be excellent. I had a 500 g bottle, and just ordered another 1 kg.

i got my best results on my Photon Mono X Printer using 1.3 -1.5 second exposure times at 75% UV and 16 second base layers. I will buy again when sales start popping up

Cures fast and the color is actually clear as opposed to some other companies saying its clear resin, but has a yellow tint to it. Thats not quite clear. This stuff is great though! Super clear and if you add a thin layer over the outside and cure it again, you can achieve an almost glass finish.

I ended up buying this stuff after accidentally making my apartment uninhabitable for a day by using normal resin. Good news is yes, it doesnt smell. I can now sit next to the printer and burn out my eyeballs with the UV instead of my lungs with the fumes. Now I should say it isnt 100% odorless but as far as I can tell you dont need a whole fume setup and a dedicated room for it it only gives you one big ol whiff of chemical smell when you take off the cover after the resin has been in the vat for a bit like after a print but after that it quickly dissipates unlike the normal resin whos smell lingers for hours. As for quality I cant really see any difference from the regular resin so in my opinion the slightly higher cost is worth it if you dont wanna wear a gas mask every time you print something.

This was a great buy. It looks like porcelain after it is cured. I like the look and will be buying more for vases Pros: - low odor - solid prints - fast curing Cons: - took some time to get it to the right settings - very watery looking. Seemed like it was expired when I first poured it into the vat.

Only giving it three stars because it took a whole bottle to tune in the settings. Also using their Plant Resin + or 2.0 whatever the call it, was way more easier to tune in. So I would recommend using the 2nd version. If anyone wanted to know I used this on my Halot one resin printer.