Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

When printing big pieces, the finished product has a yellowish color, but that is already expected. Still, sturdy as hell and a good buy.

This resin works well, I get good detail using both of my printers 2K Elegoo Mars and 4K Flashforge 8.9. However of all the resins I have tried this one smells so bad. I wont purchase again because of this.

Das Zeug stinkt zum Himmel. Wenn man es versucht, zu biegen, würde man nichteinmal ein Viertel von dem schaffen, was im Bild gezeigt wird und das Zeug zerbricht in tausend scharfe Teile, wie Glas. Ich habe ein paar unterschiedliche Teile damit gedruckt, keines davon hat gehalten. Bei der kleinsten Belastung gebrochen. Für Figürchen oder sowas vielleicht ganz gut, wenn man Funktionsteile drucken will, nicht zu empfehlen.

cette résine est excellente jadore. fait grave le taf. jai du mal a marrêter dimprimer XD

This was my first time using ABS like resin, so I expected a super strong odor and having to completely change my print settings and so on. I was surprised to find odor wise the smell is basically the same as the many other resins Ive used, not stronger or worse. Print wise i did have to adjust my exposure time slightly but so far 2 prints in and Ive gotten great results. post care is the same as any other resin.

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

Comparandola con la Eono ABS-like esta es más quebradiza. Posiblemente aguante un golpe, pero a la hora de trabajarla se comporta un poco como la resina normal, aunque se lija mejor que esta. Por ejemplo, la Eono, suena más plasticosa al impacto y las rebabas se quitan bien con un cutter, como si fuese plástico, sin astillarse. Huele lo normal. Y el negro sólo es intenso en capas con cierto grosor, si no es translúcida. Edit: He hablado con el vendedor que me ha ofrecido soporte para ver si reduciendo el tiempo de curado mejoran las propiedades de la resina y es menos quebradiza, ya que parece que hay que dejarla menos tiempo de curado, entre 3 y 5 minutos.

hafte sehr gut aber ist auch schwer zu lösen Druckqualität wie vom Verkäufer beschrieben gerne wieder

My first time using ABS like resin and it makes me like my Elgoo printer even more! Look for a comparable resin chart for your model and also double check the color of the resin as well because sometimes that affects the settings. As this was white resin it had slightly different settings than clear or black.

He probado muchísimas y esta es de las mejores, siempre la uso en mis impresoras de Anycubic