



























Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)
-
E. West
> 3 dayI found this to be nothing like ABS. very very brittle. I print for film and TV and i would never use this again. I see someone else from the UK having same problem...it could be temperature sensitive as its been cold here for months.
-
Dion B.
10-06-2025Took forever to calibrate my printer to use this resin in the first place (I have an M3, and the suggested settings on the product page werent even remotely close to accurate), but then once I did get my calibration prints to turn out perfectly, so there shouldnt have been any problems, I still couldnt get any other prints to actually work, including prints that have been proven to work fine with other resins. The amount of time and effort wasted trying to get this stuff to work is absurd. Honestly, since this is the first non-basic Anycubic resin Ive tried, Im not sure Ill ever be buying any non-basic Anycubic resins in the future.
-
vallaud
> 3 daycette résine est excellente jadore. fait grave le taf. jai du mal a marrêter dimprimer XD
-
Z=UO
> 3 dayÇa simprime mais pour le reste cest très décevant. Aucune résistance comme lABS comme il peut y avoir chez dautres fabricants. ça casse pratiquement comme de la résine classique. Cest de la résine + ! le plus ça doit être parce que cest beaucoup plus cher… autant rester sur de la résine de base.
-
Angelo Lo Iacono
> 3 dayOttima resina della Anycubic ABS. Uso questa resina per i componenti per drone. Mi trovo veramente bene. La resistenza del prodotto finale è perfetto. Poi ha una leggera tenuta alla piegatura che la rete ottima anche quando prende gli urti. Così da renderla perfetta per quei componenti che siano duri ma allo stesso tempo resistenti algi urti. Ottima
-
Zack A.
> 3 dayI have had more difficulties with this resin than competitors. I am not sure if it is just the batch or the temperature but I have had more failed layers with this than its competition. It still does its job but I have found myself doing several reprints. It is usable but requires some tinkering to get to a decent state. I will probably avoid repurchasing this resin for a while.
-
Anon
> 3 dayThis is another good resin. It prints about the same as the regular anycubic resin I tried but this is much more flexible and durable. Honestly dont notice a big enough difference in print detail to pick the other over this. The added durability for basically the Same price it just doesnt make sense not to get this over the regular in my opinion. But, my first gen Elegoo Mars doesnt exactly get top of the line detail and Im limited in size. So a newer Larger printer you might be able to tell a print quality difference. Overall its great and I definitely prefer the ABS like over the regular. A little added piece of mind knowing an accidental drop might not destroy a print.
-
Curly Bibliophagist
Greater than one weekThis worked surprisingly well for the model I printed considering I maxed out my z height and printed from only a dozen supports. There were only some issues with small details that werent supported quite enough, but even those were surprisingly strong when I tried to rip them off, especially considering they werent really that big. The resin does have some draw backs when it comes to separation. It started to separate after I came back less than 24 hours later, which isnt that big of a deal but its something to keep in mind.
-
Patrick Griffin
> 3 dayThe quality and detail I get from this resin is astounding. Using the recommended initial settings from the Anycubic website and an old first generation Photon.
-
JenN7
> 3 dayIve been using the Anycubic ABS-like to do some bigger prints that I wanted to make sure werent brittle and would be a little more sturdy (think props for costumes). Its working really well so far. I have had to adjust my settings a little bit from my regular resin, but a little trial and error with something new isnt unexpected. On my Mars 3 pro, Im doing some heavier prints, so I increased exposure on bottom layers and on all other layers by a bit, also using beefier supports--parts of my test print stuck to the FEP, so wanted to avoid that. Later prints with updated settings have been working well.