Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

vše ok

Résine supposée être resistante et après avoir imprimé une pièce, rien quen la retirant du plateau a cassé. Jen reimprime une autre, je la retire sans casser mais na pas résisté à une petite pression peu après sans faire deffort. Jolie couleur, bien que avec un peu de transparence mais déçu

molto precisa per realizzazione di modelli alveolari .

It’s much nicer than regular resin but still pretty brittle for my purposes.

This resin very, very strong but it must be used in very well ventilated areas because it smells terrible while printing. Also, be aware that printers with exposure times up to 18 seconds are not recommended. Only use this if your printer is optimized for up to 3 second exposures. Even with the smell I would still recommend this resin.

Ça simprime mais pour le reste cest très décevant. Aucune résistance comme lABS comme il peut y avoir chez dautres fabricants. ça casse pratiquement comme de la résine classique. Cest de la résine + ! le plus ça doit être parce que cest beaucoup plus cher… autant rester sur de la résine de base.

This stuff prints so nicely. I used default print settings for my AnyCubic Photon S and had no problems at all. I think it even printed better than the sample resin I received with the printer. I am not sure if you can tell from my photo but the flat base of part is not only smooth but it has a gloss like quality to it. The cage portions of the print and the internal letter structure have an almost satin look. The finished product is farily flexible but still breaks if you go to far. Definitely more flexible than other resins I have used but I wouldn’t go so far as to call this a flexible resin. I would say it has about the same flexibility as ABS which is no surprise since this is ABS like resin. Post processing was simple. Quick wash in IPA followed by drying followed by UV cure. It isn’t the cheapest resin available but the $25 price tag is not terrible for a resin that is so easy to use. I highly recommend and will buy more in the future.

I found this to be nothing like ABS. very very brittle. I print for film and TV and i would never use this again. I see someone else from the UK having same problem...it could be temperature sensitive as its been cold here for months.

Most of my 3D printing is mechanical parts rather than decorative models, so while I love the detail I get from resin printing, I really miss the structural integrity I used to get from ABS FDM prints and have found many prints to be brittle. Now, with the advent of ABS-like resins, I can get a bit more strength while retaining most of the print quality I love. Ive previously used several ABS resins from other top brands in my Photon Mono X, and they all seem pretty equivalent. Looping back to trying out Anycubics own take on the category, I found this resin to be similar performance: detail mostly looks as good as the standard resin, exposure times are similar, and the parts do feel a little bit stronger. I tested this resin in the classic Anycubic gray, and I felt like the color was comparable to their standard and water washable resins. You do need to use isopropyl alcohol to wash the prints, which makes this a little less convenient than the new wave of water-washable resins, so it really comes down to how much strength matters for your application. If youre printing mechanical parts, this is definitely the product you want. If youre making small, highly detailed figurines or models, you might prefer the water-washable resin instead.

Habe kaum brauchbare Teile damit drucken können, trotz verschiedenster Anpassung der Parameter. Drucke ja schon ein paar Jahre, aber sowas habe ich noch nicht erlebt. Die weingen brauchbaren Teile ließen sich unglaublich schwer reinigen. Auch in der Waschbox setzte sich das Harz überall zu einer extrem klebrigen Masse ab, die sich kaum mit verschiedensten Lösemitteln entfernen ließen. Wie extrem zäher Kaugummi. Eine richtige Sauerei. Hat mich Tage gekostet, alles wieder sauber zu bekommen. Daher kann ich dieses Harz nicht empfehlen. Werde es entsorgen und nie wieder in die Nähe meines Druckers lassen.