Anycubic Upgraded ABS-Like 3D Printer Resin, Hardness and Toughness 405nm UV-Curing 8K Resin, High Precision and Easy to Post-Process Standard Photopolymer Resin for LCD DLP 3D Printing (Grey, 1kg)

Most of my 3D printing is mechanical parts rather than decorative models, so while I love the detail I get from resin printing, I really miss the structural integrity I used to get from ABS FDM prints and have found many prints to be brittle. Now, with the advent of ABS-like resins, I can get a bit more strength while retaining most of the print quality I love. Ive previously used several ABS resins from other top brands in my Photon Mono X, and they all seem pretty equivalent. Looping back to trying out Anycubics own take on the category, I found this resin to be similar performance: detail mostly looks as good as the standard resin, exposure times are similar, and the parts do feel a little bit stronger. I tested this resin in the classic Anycubic gray, and I felt like the color was comparable to their standard and water washable resins. You do need to use isopropyl alcohol to wash the prints, which makes this a little less convenient than the new wave of water-washable resins, so it really comes down to how much strength matters for your application. If youre printing mechanical parts, this is definitely the product you want. If youre making small, highly detailed figurines or models, you might prefer the water-washable resin instead.

Great quality and good colour retention.

Resina de facil utilização e com um excelente acabamento

Ça simprime mais pour le reste cest très décevant. Aucune résistance comme lABS comme il peut y avoir chez dautres fabricants. ça casse pratiquement comme de la résine classique. Cest de la résine + ! le plus ça doit être parce que cest beaucoup plus cher… autant rester sur de la résine de base.

shatters really easy, prints smash like glass, tryed on many thikness and models, same results! buy cheeper non abs like for better results

This resin has been very easy to use. The odor is really the only drawback. It makes my office smell downright flammable so I decided to move the printer to my R&D shop where the ventilation is a lot better. I have used this quite successfully to add internal features to parts which I have made from carbon fiber. I like to use cheaper resins for the carbon fiber negatives and positives but this has been my choice for the permanently fixed components. It bonds well with 3M DP460. Good stuff!

Took forever to calibrate my printer to use this resin in the first place (I have an M3, and the suggested settings on the product page werent even remotely close to accurate), but then once I did get my calibration prints to turn out perfectly, so there shouldnt have been any problems, I still couldnt get any other prints to actually work, including prints that have been proven to work fine with other resins. The amount of time and effort wasted trying to get this stuff to work is absurd. Honestly, since this is the first non-basic Anycubic resin Ive tried, Im not sure Ill ever be buying any non-basic Anycubic resins in the future.

En general bastante contento con esta resina pese a un olor más fuerte que el mostacho de Charles Bronson.

It’s much nicer than regular resin but still pretty brittle for my purposes.

Comparandola con la Eono ABS-like esta es más quebradiza. Posiblemente aguante un golpe, pero a la hora de trabajarla se comporta un poco como la resina normal, aunque se lija mejor que esta. Por ejemplo, la Eono, suena más plasticosa al impacto y las rebabas se quitan bien con un cutter, como si fuese plástico, sin astillarse. Huele lo normal. Y el negro sólo es intenso en capas con cierto grosor, si no es translúcida. Edit: He hablado con el vendedor que me ha ofrecido soporte para ver si reduciendo el tiempo de curado mejoran las propiedades de la resina y es menos quebradiza, ya que parece que hay que dejarla menos tiempo de curado, entre 3 y 5 minutos.