Black Opaque Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch Thickness, 3-Piece Black Opaque Acrylic Blanks for Laser Cutting & Engraving Home Decor, Wall Decor

These are pristine pieces of acrylic that are as expected. They are NOT clear nor transparent at all. They are fully opaque and slick. Beautiful but not see through. I suspect that all of these varying colors will be the same non-transparent products. If this is what you need, you are in the right place!

As long as you manually set the height using the Set Focus feature on the Glowforge software, it will cut fine using the medium clear or medium black acrylic settings. These were all nice and flat with no warping. I saw some people had issues with the edges being rough or not cleanly cut, but mine had nice enough edges. I took one star off as the measurements are not exactly 12 x 12 x 1/8 but I did not need mine to be precise for what I was using it for.

Like the other XTool acrylic Ive ordered, this came well-packaged (cardboard, bubble wrap inside) and all of the pieces were flat and chip-free. It cuts well. Not sure if I like the etching on black - doesnt really stand out - but this is a problem with all colored acrylic. Unlike the clear that I ordered (which had plastic film on one side, paper on the other), these had plastic film on both sides. I prefer paper, since its one less layer of plastic to melt and I find it easier to remove after cutting, but this is a minor problem. I used it to make some control panels - the holes and slots cut perfectly for switches, lights, etc. The etched labels didnt work so well - Ill have to figure out something else there. One advantage over cheap acrylic is that the odor is significantly less - I can actually open the compartment a minute after cutting without feeling like I was going to get knocked out. All in all, perfect for laser cutting on my K40 - Ill upload photos of etching after I get some results that I like.

Selected White Translucent Glossy Acrylic Sheets, 12 x 12 Plastic Sheet with 1/8 Inch It is the perfect amount of transparency . You can backlight a sign with this. After a long time searching

These are not clear FYI, but in case you are looking for a clear see through panel. If you are looking for one that has a foggy look to it then these are for you. Remember it has two plastic coverings you will want to remove.

Flat, unscratched, and red. Cant complain.

Wasn’t protected on both sides and arrived with circular etchings on all pieces so half the sheet on all is unusable. Acrylic is not cheap so it’s frustrating to get it in this condition

One of the biggest disappointments I found with my diode laser cutter (XTool D1 10 watt) was that it couldn’t cut clear acrylic - the beam just passes straight through. But that was offset by the fact that opaque colors were easily cut. These sheets are ideal for multiple uses, although I mainly use them to verify cut files before sending them out to a service bureau for cutting in metal. I find a cut speed of 2mm per second and 3 passes works great to cut completely through the material with my 10 watt laser. Engraving can be done much faster. This is superb material for use in lasers. The cut is extremely thin, allowing for very efficient usage. It is substantial enough for most uses, but lightweight and flexible. If you have a diode laser, this is the right material for you.

I got a pair of Buddeze Milk Crates for “office storage” on my desk here in my apartment, and being a professional quality milk crate, things could easily fall out the bottom. These fit inside the bottom perfectly and prevent anything from falling out. So they perfectly meet a need and are durable enough to last.

Cuts well on my laser. Scratch protector sheet on both sides