COMOWARE Hole Saw Kit for Wood- 16 Pieces 3/4’’-5’’ Full Set in Case with 1pcs Hex Key, 2pcs Mandrels and 1pcs Install Plate for PVC Board Plastic Plate Drilling Drywall and Soft Wood

Got the job done, but not a tool youre going to want to use more than once or twice. Not sharp at all and the precision on the hole size isnt great. Cheap and takes a bit of elbow grease. Id imagine itd be great on something softer, like drywall.

I bought these hole saws to drill through a laminated 3/4 piece of plywood. I needed two holes and the hole saw felt dull about half way through 1st hole. The 2nd hole was a challenge as the hole saw bracket broke and stripped at the chuck. I would say these are made for very light projects but they are cheap enough to be disposable.

Muy mala calidad

Was happy I found one that fir over the drain pipes.

This was perfect for my application I use this to cut the holes out for cornhole boards. Very easy to use and made a clean cut on the plywood I was using. Much easier than using a compass and a jig saw.

Truly for thinner, lightweight materials such as drywall and plastic, which is what I purchased this for. I also used it to cut for a tub/shower surround hole to attach the finish trim piece. Worked great for that.

The only negative was that the two alignment pins were angled outward instead of being vertical to the plate. I had to bend them to align with the mating saw blade. That weakened the rivet connection to the baseplate.

The bit for the hole saw broke after about 5-6 uses. Its cheap so I didnt expect much, but still, the bits are so brittle that they should give you two. Especially since they dont use a standard sized bit.

They work well

Excellent set of hole saws for the relatively low price. Used on pvc and wood with absolutely no issues. The bits are nice and straight and alighnment seems true. Only small issue I have is the smell of the oil they use is absolutely horrific. Its an acidic rotten smell and it doesnt seem healthy. Thats my only complaint.