Creality Ender 3 Glass Bed Upgraded Platform 235x235x4mm for Ender 3 S1/ Ender 3 / Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro, 3D Printer Tempered Glass Build Plate Surface

This thing is so nice, they should ship with the printer. It took about 10 minutes to install and I was off and running. The prints stick when its warm and once it cools off the print just comes right off with no fuss. It makes loveling the bed very easy. Pro tip... Adjust the limit switch and put a piece of tape on the glass bed where the printer head travels to autohome. I almost put a big scratch in mine because the nozzle dragged along the top of the bed.

I’ve been getting PERFECT first layers using this print bed. HIGHLY recommend! And I recommend using 65 degree Celsius for printing, DO NOT remove your print from the bed until it cools down to 35 degrees.

Prints adhere much better to the glass bed - Remember to re-adjust your stopper one upgrading the bed, or else youll destroy your nozzle, and possible the bed!

Its nice arrived super fast, got it out put it on my printer and went back to look for the locking clips...nothing... tried original clips for basic print mat... WAY too small... so now I get to wait a few more days and order some clips, thanks for the heads up...

What a difference from printing on the mat that was provided, the bottom up of your print is so much smoother better quality heats more evenly can’t express how much better it is a print using a class bed.

I bought this to use on my Ender 3 because the original (fiberglass?) build plate was significantly warped. My first print on this glass build plate didnt adhere, so I cleaned it thoroughly with isopropyl alcohol and also raised the bed temperature from 50 °C to 55 °C. That did the trick, and Ive done multiple prints that have turned out perfectly. So far its been very easy to remove the parts from the plate (much easier than the original plate): basically, they snap right off when the print is done. I only print using PLA, so I cant vouch for how it would work with other materials. One issue to note is that you will need larger binder clips, since this plate is much thicker than the stock one.

Nothing I try will get the print to stick with this bed, on the rare occasion something sticks in the beginning it either starts warping and I kill the print or it breaks free and were shooting plastic spaghetti everywhere. Totally worthless waste of money.

I make parts and so I need to use stronger materials for function in machines. PETG, PETG Carbon fiber, And PC carbon fiber. The temperature for the bed is higher and normal removable flexible build plates dont work. Even the ones that come with the PETG get stuck and are destroyed after one print. This holds up about 9 months of continuous use. And I use a build plate adhesive designed to allow the PETG to be removed without sticking to the glass. I may try some smoot glass, but the bottom surface is fine with this, textured surface.

Amazing upgrade for the Ender 3. Highly recommend buying a new set of springs and metal adjusting wheels. Much better than the stock bed. Just make sure the bed it properly level or you could gouge the glass. Clips are recommended but don’t seem absolutely necessary as the bed has great adhesion.

i really do like printing on this glass, but you still need to use something like a glue stick for ABS, along with a brim or raft. i havent tried to print anything on this plate using PLA, but i think it would probably work without any additional material for adhesion. all in all, i would probably buy one again if i needed another glass plate.