Creality Ender 3 Glass Bed Upgraded Platform 235x235x4mm for Ender 3 S1/ Ender 3 / Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro, 3D Printer Tempered Glass Build Plate Surface

Its the truth! Get it. Clean with isopropyl first.level the bed. And enjoy never having issues with adhesion for PLA again. PetG has givenme issues though but PLA and ABS work great. I still use a brim for ABS because or paranoia but its probably overkill.

Not user error, after tons of tries I just swapped the original (scratched but otherwise okay) bed in and boom, prints stick. This might as well be coated in Teflon. Absurdly frustrating.

Just buy it... they are night and day better than flex plates... coated to allow strong adhesion with heat and as it cools the print becomes easier to remove... don’t try to remove when you are at temperature... Most likely you won’t be able to… I am not paid by anybody I am brand new to the printing world and I will be buying this product over and over…appreciate the coating and the less hassle with leveling...

I will never go back to using the printing mat, printing on glass is so much better.

i really do like printing on this glass, but you still need to use something like a glue stick for ABS, along with a brim or raft. i havent tried to print anything on this plate using PLA, but i think it would probably work without any additional material for adhesion. all in all, i would probably buy one again if i needed another glass plate.

Several days of testing at every appropriate temperature, nozzle height, initial layer speed, using a thin layer of hairspray, then a thick layer of hairspray, then a glue stick, and then re-cleaning the bed with dish soap, alcohol, and not touching it at all, I have decided this bed will NEVER have any adhesion with my prints. The stock Ender 3 bed was effortless adhesion with any filament once calibrated. Completely useless. It was also not completely flat in the center.

after my original table broke Ive got this one. This give real nice surface for first layer. TPU will stick to it. For PETG and PLA I use purple glue stick - works much better then plastic OEM.

Esto es una verdadera porqueria, no aguanto 3 printiadas con pla a 70 C la cama , despues cuesta que se adiera las piezas .por favor no compren este producto

I’ve been getting PERFECT first layers using this print bed. HIGHLY recommend! And I recommend using 65 degree Celsius for printing, DO NOT remove your print from the bed until it cools down to 35 degrees.

It is not sticky at all -- I tried level the bed for 10ish time and tried multiple bed temperature. It doesnt come with even super cheap metal clips, so you have to buy them yourself. When you put metal clips on, the glass bed is not flat anymore --- actually the glass bed itself is not flat anymore once you put it on.