Creality Ender 3 Glass Bed Upgraded Platform 235x235x4mm for Ender 3 S1/ Ender 3 / Ender 3 Pro/Ender 3 V2/ Ender 5/ Ender 5 Pro, 3D Printer Tempered Glass Build Plate Surface

No matter what i do, nothing sticks to the surface. I do not recommend this product! Get the flexible metal plate instead from annother seller.

Im printing on the smooth side with PLA, and with a raft. I clean the plate with isopropyl alcohol before every print. I print the first layer at 80 degrees C, and the rest of the print at 65 degrees C; no hairspray, no glue sticks. Adhesion is fine during the print, and the part effortlessly removes once cool; dont have to pry it off. The only issue I have encountered so far is that the parts tend to warp at the corners; the raft corrects this. I havent experimented with temp settings beyond this, so there may be some other combination that works better.

If you are tired of non sticking prints look no further after I got myself one of these and re calibrated I have had 0 issues with prints not sticking even during a 73 hour print

Im serious. I put this glass on a printer I gave to my 11-year-old son, and no other surface sticks better or has a nicer finish. It has enough mass that I put some tiny adhesive dots underneath it and it stays put without being impossible to remove. And its so easy to use that he runs prints all the time without my help or supervision. I cannot recommend this bed highly enough! EDIT: Changed review down to three stars. I bought a second glass bed topper and NOTHING would stick. I washed it six ways from Sunday with Dawn soap, IPA, and the hottest water imaginable. Scrubbed it mightily. Might as well have been teflon.

Lets be real, are these reviews real??? Because i couldnt get anything to stick onto this bed but if you flip it upside down on the side thats just glass it works just fine. I gave up after 2 hours thinking it was my settings , flipped it upside down and found it it wasnt my settings. Also the glass is not perfectly flat. Theres low and high sides on it. Would i purchase it again? Probably not, id be better off getting a regular piece of glass. Try a different product would be my recommendation

Worked great when I got it. After about a month, PLA does not adhere well at all anymore. Printing at higher heat and lower first layer helps, but there is always curling now, and smaller prints always fail. Better to find something that wont wear out quite as quickly

Thought Glass would be flatter than a magnet its still inconsistent and prints dont seem to hold to it as well pretty disappointing

The clips included withy this Glass Bed cannot be attached without having the print head collide with the clips or the clips colliding with the gantry.

If I could give this 0 stars, I would. This is not the stock glass that comes with the printers. The surface is completely different, and I found adhesion impossible. I have 5 printers I have been using for 3 years now, so I’m not new to the hobby. I ordered 4 of these, and all of them gave me the exact same issues. Nothing would stick. If I did manage to get the first layer to go down, it was because I had the nozzle so close to the glass that it drug through the filament. I didn’t once have corners of prints stay down. Every single one warped.

Its nice arrived super fast, got it out put it on my printer and went back to look for the locking clips...nothing... tried original clips for basic print mat... WAY too small... so now I get to wait a few more days and order some clips, thanks for the heads up...