Creality Official 5pcs MK-HF Nozzle with 2pcs Sprite Extruder Silicone Sock, Copper Alloy Nozzles for Ender 3/V2/Pro/Max/Ender 3 S1/Pro/Plus/Neo Series/Ender 5 Series/Ender 6/CR-6/CR-10/Sermoon D1/V1

Running certain filaments through your printer will increase the size of the opening in your nozzle. For this reason, I think it is important to have extra nozzles on hand. This set allows me to have extras on hand so I dont get caught without one.

I love these nozzles for PLA and PETG, but for some reason I could not get them to print TPU well. I did a PID tune, but there must be something with their heat conduction that flexible filaments didnt like. I tried them with NinjaTek and Amazon Basics TPU. Both were a no go. Ill still buy them though. They are fantastic with rigid filaments

Although the directions were not very clear, it was not that difficult to install. The wiring was labeled clearly so it was not confusing connecting everything to the main board. The additional bolts that were provided are required if youre using the BL Touch or the CR Touch otherwise, when it goes to level the bed, the extruder will hit the frame on the right side. The main issue I had is that I am using the CR Touch and where they have the mount for this, it brings it too far forward. So when it goes to level the bed, it literally misses the first row. I had to design and print a new mount that will locate the CR Touch more in line with the nozzle so that it would be able to hit all nine spots on the bed when leveling. If anyone needs the CR Touch mount, I will be happy to provide it. With regards to the firmware, I did not have to upgrade the firmware due to the new mount that I designed. Besides, they only provide a link for the 4.2.2 firmware whereas I have the 4.2.7. Once installed, set your E-Steps to 424.9 and then calibrate from there, I actually had to increase my E-Steps to 433.5. Also, be sure to adjust your Z Offset as well if using the CR Touch, it will be different. Im totally happy with this upgrade.

This is a great upgrade for the Sprite System. This has the bimetallic heatbreat that allows for temps up to 300C. This is used for the first generation of the S1 series, and is a simple upgrade. Installing this on the Sprite system is very simple.

I recently received this set of 5 copper alloy nozzles with 2 silicone socks for my 3D printer and I have to say, I am extremely impressed with the quality of these nozzles. The construction is incredibly durable and has held up well during multiple printing sessions. The set comes with 5 different sized nozzles, allowing for a wide range of printing options and the ability to customize prints to specific needs. The inclusion of 2 silicone socks for the extruder is also a great feature, as it helps to prevent any unwanted filament leaks or jams during printing. Installation of the nozzles was also very straightforward, and I had no issues replacing the old nozzles with the new ones. The quality of the prints produced with these nozzles is also top-notch, with clean lines and smooth surfaces. Overall, I highly recommend this set of copper alloy nozzles and silicone socks to anyone looking for a high-quality and durable upgrade for their 3D printer. The versatility and durability of the nozzles make them a great investment for anyone who takes their 3D printing seriously, and the inclusion of the silicone socks only adds to the value of this set.

Nice upgrade to print at higher Temps. From 260c to 300c Just to let you know that if your thinking to print higher Temps than 300c then look for something else. This caps at 300c Still can print with alot of items but there are more filaments that need higher Temps too. I always though the sprites could print to 300c but guess was wrong on that or this was sold useless but guess they stopped at 260c. I dont think this will require new motherboard but will have to check on that. Memory says some of the other printers have the same setup on motherboard and sprite to get 300c on so maybe install this then upgrade the firmware. For me all my printers have the sprite so when I ready to upgrade I got it. The copper is a good idea to disperse the heat faster too. Hope you consider this when your ready to upgrade too. Good Luck in printing. Experiment only makes you better in printing.

This is an easy upgrade for the sprite extruder. Unplug the old hotend and thermistor, loosen a few bolts, slide out the old hotend and PTFE tube, then reverse the process with this kit except no more PTFE tube. This all metal hotend upgrade is necessary if you want to print a lot of PETG. While the unit will print PETG just fine out of the box, the PTFE tube degrade over time and eventually you get nasty clogs that ruin prints. It is possible to purchase just the bi metal heat break and use the existing heating block but purchasing this is just more convenient. If your printing PETG, ASA, ABS or anything other than PLA or TPU then go ahead and upgrade to this all metal hotend.

I recently tried the Creality stainless steel 3D printer nozzles and I have to say, Im impressed with their quality and performance. These nozzles are made of high-quality stainless steel, which makes them incredibly durable and resistant to wear and tear. The nozzles are also easy to install and fit perfectly with my S1 pro. One of the main benefits of using these stainless steel nozzles is that they can handle a wider range of materials than regular brass nozzles. This is because stainless steel is less likely to corrode or react with different types of filament, making it a great choice for printing with more exotic materials like carbon fiber or metal-infused filaments. Overall, I highly recommend the Creality stainless steel 3D printer nozzles to anyone who wants a high-quality, durable, and versatile nozzle for their 3D printer. Theyre a bit more expensive than regular brass nozzles, but the extra durability and flexibility are definitely worth the investment.

Went on a ender 3 pro sprite pro extruder worked as is designed for. Awesome product got my printer working awesome again.

Whats there to dislike. Original Creality part. This is a must upgrade if you want to print PETG ABS and other High Temp Filaments. Great packaging, and fast shipping from the seller.