ECO-WORTHY Heavy Duty 330lbs Solar Tracker Linear Actuator Multi-function (12V, 12)

Do NOT use for automatic chicken coop door unless you have a sensor that stops it if a chicken is in the doorway.

These are great

Using as a bed lift for my JD Gator and it works great..

After receiving the actuator and placing in my installation, I ran the actuator and with a load of approximately 200 pounds in line with the shaft, once the power was removed the actuator would back-drive (the load would fall). Installation was in a push type manner, which the unit was advertised for. As this was inconsistent with the products listing, I contacted the seller, whom initially had a prompt response which was appreciated, and that they are awaiting a response from the manufacturer. Well, after 11 days of waiting, I cant wait any longer to hear an excuse of why it doesnt work as advertised. Had to send it back and replace it with a different unit.

Power tilt on my outboard

Well made but both packages containing the hinge swivel pin were open and pins got lost somewhere between packaging and delivery got lost. I did find 1 pin loose in the packaging box but the rest were gone.

Worth it. We have this on a timer that opens the chicken coop door in the morning and closes it at night. We can adjust the timer from our phones since it is attached to a smart plug / relay switch. Its been doing this for about a year now without any issues.

I never had a chance to try this actuator. The first one I ordered was inoperative right out of the box. I checked the leads with and ohm meter and it was open circuit, applying power no movement, so I sent it back thinking it was a fluke. The second unit I received did the same, no continuity and did not work. After returning them both I ordered (from a different manufacturer) a more expensive and hopefully functional actuator from Amazon.

My Solar system wasnt tracking. This solved my problem.

The actuator worked just like it should but it quit working before a year was up. I took it apart and found that the motor was completely full of water. I was under the impression that it could be used outside exposed to the elements as long as it was not submerged in water, apparently it can’t be used in the elements or I just got a poorly sealed actuator.