ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g

I am very satisfied with this resin, there is not much to say other than the quality of the end product and the amazing support from this vendor are on point.

nice

Best resin I have tested.

I really like this resin. It produces consistent results and I have had very few failures. The failures that I have are usually because of under-supported models. This resin is easy to clean and if your dial your settings in then very little clean up is required. Paints well. Sands welll.

I have had 8 failed prints in a row. I have cleaned my machine many times. Zeroed it out. Tried multiple different prints, rafts and supports. I have also lubricated my resin tub. But every print sticks to the tub. I have not had this issue with any other resin. Not sure if mine is contaminated or its just piss poor. Seems more watery than the last few gray resins I have used.

I got my Anycubic Photon 3 days ago and this is my first print with non_Anycubic resin. I think the results speak for themselves, the print is flawless. It just needs a little cleaning. I may have over-cured the print with UV giving it a slight yellowish tint. Normally the resin is robins-egg blue.

Everything was good except there was no tape on the box to keep it secured so if the truck hit a pump wrong the bottle would have been flung all over the truck

First off, the gray resin in my opinion is the best at showing details on unpainted models or prints. :) The odor on this resin is extremely tame. I had worked in a paint store for 5 years and had been exposed to all kinds of industrial grade enamels, solvents, etc. This stuff isnt even as stinky as opening up a normal gallon of paint. High points there. I have it in my computer room where I prefer to reside for long hours, and have never been bothered by the odor, especially when the cover is on the printer. No smell. As for quality, Im kind of blown away. I had printed a miniature for D&D, and didnt check the scale of the model. Base was supposed to be about the size of a quarter, but the overall height was less than a quarters diameter. Despite the ridiculous tiny-ness of the model, details are still sharp and the stuff still holds together! He has a sword about as thin as a credit cards thickness and is still standing, even through snipping supports, swirling in the IPA bath, handling with no extreme precaution, etc. The price is extremely fair, in my opinion. You can buy approximately the same amount of material for FDM printing (1 spool) for about the same price, and FDM is known as the cheaper of the 3D printing technologies. 500g turns out to be a little less than half a liter, which has gotten me about a dozen D&D minis, as well as a 6-inch tall statue, with about a third of the bottle still left. Overall highly recommend. I will probably be buying the 1000g size next.

The information on given on the resin such as hardness, wavelengths, and exposure times are super informative and helpful. The colors are amazing and great for these resins. 10/10 would buy again!

Works very well with anycubic photon S and is very well priced. It does smell little more than the basic anycubic resin though.