ELEGOO Mercury Plus 2 in 1 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

It’s super annoying to have to extend the time by 30s intervals all the way up to 10min. Holding the button doesn’t work...

everything is seem to work great but the top for the washing part to seal the container wont close like the blue seal wasnt cut right so i have now way of closing it

This has made my process after printing so much easier from my previous setup. It also doesnt take up much space so it sits next to my Mars. I just drop it in to wash right immediately after I finish printing, let it dry and cure in the same place versus moving from one device to the next.

First experience with resin printing. I got the Mercury, a Mars 2 Pro and a bottle of water washable resin. I adjust the hangar so that the build plate just touches the top of the water. When the water moves it will end up flowing onto the top of the build plate to remove most of the residue there. Pleased with the results so far. Note - the sensor prevents the unit from running without the cover on, even in wash mode.

Practical

I live in motels and this thing here works as advertised its a washing machine. I may only be able to wash 1 pare of socks or 1 shirt at a time but it get the job done 10/10 would buy another so I can wash 2 shirts at once. -Dan datsun mechanic 1971-1984 -sent from elagoo mars 2

Elegoo products are easily my favorite by far. The only thing I wish there was a volume control for the buttons

Update: elegoo sent me a new one and two bottles of resin! Machine works wonders for cleaning up prints. The drying time seems to be a little off but that is likely user error. Old: Came broken and wont turn on, power supply says its good and is functional but the machine itself doesnt turn on no matter what I do, cover on and secure check a different plug and even breaker entirely check. All I get is flickering front lights and the smell of ozone meaning there probably a disconnect somewhere along the way. Cant even get a refund because I threw the packaging away because I had to wait a day for the isopropyl alcohol. 0/10 wouldnt recommend, go with the anycura model instead. Or just make your own with a magnetic stirrer, a uv lamp and some reflective sheeting in a secure box.

This is very good for curing as long as you line the pegs on the base with the magnet in the base of the unit. The washer is also great as long as it is a lined. I really like this a lot for the two in one feature. So far. so very good!

Ive been printing mdf for years, but just recently took the plunge into SLA. Ive been printing non stop and the post processing was slowing me down. Within just two weeks this has already made my printing throughput much faster and simpler to do. Wouldnt print without it again.