ELEGOO Mercury Plus 2 in 1 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models

I used to use separate containers and a paint brush to clean prints, now into the tank and clean remove and cure.

This is very good for curing as long as you line the pegs on the base with the magnet in the base of the unit. The washer is also great as long as it is a lined. I really like this a lot for the two in one feature. So far. so very good!

When people say resin printing is messy or difficult, this right here is the solution. This all in one is so simple to use it makes instructions unnecessary, it’s intuitive and simple, but most importantly FAST and makes clean up of your figures so easy. If you own any resin printer, this is the other half to that. You need this.

Cleaning and curing at any time of day or night no matter the weather is awesome! Machine is quite and takes up no more room than my Mars Pro.

I was really really intimidated by SLA printing when I started. The idea of bring forced to clean and make sure theyre all perfectly cured after each and every print sounded like a pain and honestly, a little scary. This product throws all those worries out the window and makes it SO easy. Starting with the wash you have 2 choices in how you want to do it. You can pop them off the build plate with your scraper and toss them in the basket and let them wash for a few minutes. I like to overdo it and do 5 minutes or so and it seems to switch direction its spinning in the middle of the process. If you dont want to use the basket you can just attach your plate to the metal bracket shown in my picture in the bottom right and hang the build plate from the top just like in your Mars and let the alcohol clean both the print and the plate. Afterwards you just remove the supports, place them back in with the clear rotating plate and cure them for 2-3 minutes and youre good. It sounds a lot longer than it is. Its SO easy.. So if youre worried about the post printing regimen then get this. It makes it so easy. Though honestly I would buy a second basket as well so that you can have a dirty clean bath and a cleaner clean bath. Thats my plan when I get more money.

I love this machine well worth the price. I have no issues with it cleans and cures perfect!

Im sending back all ELEGOO products. I bought a Mars 2 Pro and the wrong product was sent. I had to spend $20 on a round trip to town to exchange it. When the printer finally came, there was a quality control issue. So instead of resin, I bought a Neptune 2 to try my luck with PLA. When it came in there was another quality control issue. I was on video chat with three different people for almost 8 hours of total troubleshooting. They all agreed its defective.

It’s great

It does what its supposed to. The wash function works quite well, even with a bunch of complicated parts next to each other. The curing function is effective and it only seems to take a few minutes to get a good surface cure going. However, the stir motor for the wash function makes an awfully shrill high pitched noise. I can hear it upstairs through closed doors. We can even hear it outside on our patio when its running inside. Makes it impossible to run it during any kind of quiet hours, or when you dont want to hear a constant high pitched whine throughout your home. As much as I like it otherwise, Ive been tempted to return it just because of the noise. The dogs absolutely despise it as well.

Might be because I use water rinsable resin, but I have a bucket that I fill with water ($6) then I just shake it and then put it in my shoebox with UV light strips ($10) and it has the exact same effect as this product ( $130). Same effect ($16)>($130)